User manual SEVERIN PROFI-MIX SM 3807

[. . . ] To prevent injuries, take special care when handling these parts. After switching off, always wait until the motor has come to a complete standstill. Always remove the plug from the wall socket after use, and also - in case of any malfunction - during cleaning of the appliance. During operation, the unit should be placed on a scratch-resistant surface. [. . . ] The blade unit and blender disc both screw on and off. Before removing, ensure that the drive pin on the shaft of the blender unit sits properly in its recess; then use a suitable cloth to grip the attachment, turning it clockwise to unscrew and remove. Way, when fitting an attachment, use a cloth to grip and turn it anti-clockwise to tighten. - Blade unit The blade unit is suitable for processing fruit and vegetables, and when preparing baby food, purée or mashed food. - Blender disc The blender disc is suitable for any kind of liquid - milk, yoghurt, mayonnaise, cocktails etc. sieve and blender jug The sieve can be inserted in the blender jug. When processing fruit and vegetables, the juice is collected in the jug while the pulp remains in the sieve. Blender models with additional chopping attachment With the normal blending rod removed, the drive unit can be attached to the chopping attachment. - Fit the cutting blade unit into the bowl before filling the bowl with the food to be chopped. exercise extreme caution: the blades are very sharp. When handling the blades, always hold them by the upper protective plastic covering. - Insert the plug into the wall socket and press the operating button in brief bursts until the mixture has reached the desired consistency. During processing, the lid and bowl should be securely held in place. Before the bowl is filled, the food to be processed should be cut into pieces of about 1 cm. - Do not fill the bowl with hot liquid or hard material such as ice cubes, nutmegs, hard grain, coffee beans, rice or spices. Other food items such as chocolate or raw meat are also unsuitable for - After processing, always remove the plug from the wall socket before removing the lid and detaching the drive unit by pressing the release button. The processed food and the blade unit can now be taken out. - When processing further food after the first cycle, make sure that the receptacle for the blade unit at the bottom of the bowl is free of food residue before refitting the unit. Wall bracket The wall bracket can be mounted on any wall by using the screws provided. General care and cleaning Always remove the plug from the wall socket before cleaning the appliance. To avoid the risk of electric shock, do not clean the drive unit or the power cord with water and do not immerse them in water. The drive unit may be wiped with a slightly damp, lint-free cloth. [. . . ] Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. [. . . ]