User manual SEVERIN SBS 8991

[. . . ] Dear Customer, Read the complete instruction manual carefully before you start to use the appliance. The appliance is only to be used by persons who are familiar with the safety instructions. If you pass it on, attach these instructions as well. intended Use · The appliance is designed for We are not liable for possible defects in the case of abnormal handling or disregard of the instructions given by this manual. [. . . ] Do not connect the appliance to an inverter · The power plug should not touch the back- The appliance can be put into operation by plugging the mains plug into the point. A complete switching-off only occurs by pulling the mains plug. The control is carried out by push buttons under the display on the outside of the cold storage door. If the cold storage door is closed and no push button is touched within 3 minutes, then the display light goes out. The inverter symbol always lights up as The device is equipped with an automatic key lock. To change the settings, first press the button for three seconds. If no changes are made to the display for three minutes, the key lock is reactivated. Regulate the Temperature in the Cooling Room Tap the button `TempZone'. If the display for the cooling temperature blinks, then every tap on `Temp' changes the temperature by one degree between 2 °C and 8 °C. If you tap again at the setting of 8 °C, then `OF' illuminates and the cooling for this part of the appliance is turned off. VeggiBoxes The VeggiBoxes serve as the optimal storage for fruits and vegetables. Regulate the Temperature in the Freezer Tap on the button `TempZone'. If the display for the freezer temperature blinks, then every tap on `Temp' changes the temperature by one degree between ­24 °C and ­16 °C. Special Features Tap if necessary several times on `Function' and subsequently on `OK', in order to activate the following special features. To deactivate a special feature, tap the `Function' button until the symbol of the desired function gets illuminated. Fast Freezing This setting fixes the freezer temperature for 26 hours at ­32 °C. This temperature cannot be changed until the function is deactivated. After 26 hours, the appliance will freeze again at the preset temperature. SMART This setting fixes the cooling temperature at 4 °C and the freezer temperature -18 °C. These temperatures cannot be changed until the function is deactivated. After 5 seconds without further input, the blinking stops, and the respective function will be taken over. special Functional Features Memory Preservation in the Case of Power Failure Every configuration will be preserved in the case of a separation from the mains supply and will come into operation again when the mains supply is re-established. [. . . ] These appliances contain valuable resources that can be recycled. A correct waste disposal protects the environment and the health of those around you. To get informed about it, either defer to your municipal administration or the retailer. Pull the mains plug out of the socket and disconnect it from the appliance before getting rid of it. [. . . ]