User manual SEVERIN SM 3717

[. . . ] Feeder opening stopper Important safety instructions Before the appliance is used, the main body as well as any attachments should be checked thoroughly for any defects. If the appliance, for instance, has been dropped onto a hard surface, it must no longer be used: even invisible damage may have adverse effects on the operational safety of the appliance. Do not leave the appliance unattended while in use and keep children away. This appliance is not intended for use by any person (including children) with reduced physical, sensory or mental capabilities, or lacking experience and Knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety. [. . . ] Before removing the blender jug, make sure that the control switch is in position 0. This also applies when fitting the blender jug to the motor housing. If the switch is not in its off-position (0), the motor will start immediately. Ice crusher This blender may also be used to crush ice. Put the ice cubes into the jug, but do not fill over the 750 ml mark, and switch the appliance on. Once the ice cubes are crushed to the desired size, switch the appliance off and take out the ice. Operation - Fit the blender jug to the motor housing with its handle on the right and lock it by turning anti-clockwise into the operation position. To avoid possible foaming or spilling when processing foamable or thin liquids such as milk, do not fill the jug over the 1250 ml mark. To add ingredients during operation, the stopper in the centre of the lid can be removed by turning it in an anti-clockwise direction and then lifting it off. Do not put any objects into the blender jug while the appliance is operating. - Insert the plug into the wall outlet and use the control switch to select the required power setting. Depending on the food to be processed, the appliance may also be operated for short periods of time with the pulse setting "P". Do not operate when the blender jug is empty. - After using the blender, switch off and remove the plug from the wall socket. Wait until the motor has come to a complete standstill before removing the blender jug. To remove the jug, turn in the opposite direction from that described in the assembly instructions. General Care and Cleaning Always remove the plug from the wall socket before cleaning the appliance. To avoid the risk of electric shock, do not clean the motor housing or the power cord with water and do not immerse them in water. The motor housing may be wiped with a slightly damp, lint-free cloth. Do not use abrasives, harsh cleaning solutions or hard brushes for cleaning, and do not clean in a dish-washer. [. . . ] This guarantee is only valid if the appliance has been used in accordance with the instructions, and provided that it has not been modified, repaired or interfered with by any unauthorised person, or damaged through misuse. This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. If within the guarantee period, please also provide the guarantee card and proof of purchase. [. . . ]