User manual SEVERIN SM 9685

[. . . ] Damage cannot always be detected from the outside; the entire unit should therefore be checked by a qualified technician before it is used again. This appliance may be used by children (at least 8 years of age) provided they have been given supervision or instruction concerning the use of the appliance and fully understand all dangers and safety precautions involved. Children must not be permitted to carry out any cleaning or maintenance work on the appliance unless they are supervised and at least 8 years of age. The appliance and its power cord must be kept well away from children under 8 at all times. [. . . ] In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. The address can be found in the appendix to this manual. Operation We recommend the use of long-life low-fat milk (UTF, 1. For best results, the milk should be taken from the refrigerator immediately before frothing. The underside of the container and the contact area on the inside of the base must be clean and dry. Choosing the stirring head – Use the smooth stirring head to heat up milk. €“ For frothing and heating milk at the same time, use the serrated head. €“ For cold-frothing milk, also use the serrated head. €“ When not in use, the stirring heads may be safely stored at the rear of the housing. Fill amounts – Always observe the minimum mark and ensure the container is filled with at least 100 ml milk. Place the appropriate head onto the mounting protrusion inside the bottom of the container. Put the required amount of milk into the container. Place the lid and insert on the container. Insert the plug into a suitable wall socket. A beep signal is heard and the 65° C indicator starts flashing. Use the temperature selection button to set the desired temperature or the coldfrothing function (blue dot symbol). After a beep signal is heard, the indicator light for the selected temperature function shows a steady light and the cooling system of the motor is heard to start up. A moment later, the appliance starts to stir the milk. Once the milk is sufficiently hot or the cold-frothing process is complete, both heating and stirring processes stop automatically. The indicator light for the selected temperature function flashes, and a number of beep signals are heard. You can now remove the milk container from the base. [. . . ] Fit the smooth stirring head and set the temperature selector to 60° C. As soon as the milk has 10 Disposal Do not dispose of old or defective appliances in domestic garbage; this should only be done through public collection points. proceed as described in the section Heating up or frothing milk. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. [. . . ]