User manual SEVERIN VL 8632

[. . . ] Two-crosspiece base stand Important safety instructions Do not operate the fan if the appliance is not completely assembled or if the protection grille is not correctly installed, closed and secured with the retaining ring. Do not leave the appliance unattended while in use. Before the appliance is used, the main body as well as any fitted attachment should be checked thoroughly for any defects. Been dropped onto a hard surface, it must no longer be used: even invisible damage may have adverse effects on the operational safety of the appliance. [. . . ] No responsibility will be accepted if damage results from improper use, or if these instructions are not complied with. This appliance is only intended for domestic use and not for commercial applications. In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. The address can be found in the Before using the appliance for the first time Remove all packaging completely before the appliance is used for the first time. Fan-blade unit and grille assembly - Remove the central grille locking ring from the motor housing by turning it anti-clockwise. The two alignment pins on the motor housing must fit into the corresponding slots in the rear grille. - Place the front grille in front of the rear grille into the retaining ring and tighten the retaining ring screw. Ensure that both grille rims are correctly positioned in each of the corresponding recesses inside the retaining ring. tube-assembly mounting - Place the protective caps on each end of the base crosspieces. The ends may be compressed to facilitate fitting the caps, which click audibly into place. - Fit the two parts of the base stand into each other. - Fit the main support tube and secure it with the screws on to the base stand. - Turn the tube locking ring anti-clockwise to loosen it and push the cover down the main supporting tube until it sits firmly on the base stand. - Pull out the inner support tube as far as desired; then fit the tube locking ring Operation - Insert the plug into a suitable wall socket. - To adjust the tilt angle of the fan head, simply push the head upwards or downwards. The fan head assembly automatically locks into its various positions. - In addition , the oscillation function can be engaged by pushing the control knob in. [. . . ] This guarantee naturally does not cover wear and tear, nor breakables such as glass and ceramic items, bulbs etc. If the product fails to operate and needs to be returned, pack it carefully, enclosing your name and address and the reason for return. If within the guarantee period, please also provide the guarantee card and proof of purchase. - Druk de ventilator blad unit op de drijsas; zorg ervoor dat de pin op de as in de daarvoor bestemde inkeeping van de unit valt. [. . . ]