User manual SEVERIN WK 3369

[. . . ] Children must not be permitted to play with the appliance. Caution: Keep any packaging materials well away from children – these are a potential source of danger, e. Do not leave the water kettle unattended during operation. Use only pure water when filling the container to the desired level, observing the Min. [. . . ] ρ¬ In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. The address can be found in the appendix to this manual. Thermal safety cut-out The preset thermal safety cut-out protects the heating element from overheating should the appliance be erroneously switched on without any water, or if the heating element is calcified. Once the safety cut-out has switched off the kettle, it must be allowed to cool down sufficiently, or must be descaled before it is switched on again. Temperature control The temperature control is used to select the desired water level. Once it is reached, the kettle will automatically switch off. the temperature is infinitely adjustable. To bring water to boiling point, the temperature control should be set at its maximum. B: The setting increases as the control is turned clockwise, and decreases as the control is turned anti-clockwise. Boiling water – Remove the water container from its base. €“ Use the lid-opener lever to open the lid and fill the container with water to the desired level, observing the Min. €“ Before closing the lid and placing the container back on its base, ensure that the appliance has not yet been switched on. €“ Insert the plug into a suitable wall socket, turn the temperature control to the desired setting and press the On/Off switch. – The heating process begins. Once boiling point or the pre-set temperature has been reached, the appliance automatically switches off and the indicator light goes out. €“ To stop the boiling process earlier, simply put the On/Off switch to its Off position. €“ To pour hot water, remove the container from its base. [. . . ] ρ¬ Do not pour descalers down enamelcoated sinks. General cleaning and care  Before cleaning the appliance, ensure it is disconnected from the power supply and has cooled down completely. ρ¬ To avoid the risk of electric shock, do not clean the kettle and the base with water and do not immerse them in water. Under this guarantee the manufacturer undertakes to repair or replace any parts found to be defective, providing the product is returned to one of our authorised service centres. [. . . ]