User manual SHARK EP602

[. . . ] Model EP602 ONE (1) YEAR LIMITED WARRANTY EURO-PRO Operating LLC warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of the original purchase, when utilized for normal household use, subject to the following conditions, exclusions and exceptions. If your appliance fails to operate properly while in use under normal household conditions within the warranty period, return the complete appliance and accessories, freight prepaid to: US: EURO-PRO Operating LLC, 21 Lawrence Paquette Ind. 12919 CANADA: EURO-PRO Operating LLC, 4400 Bois Franc, St. If the appliance is found by EURO-PRO Operating LLC to be defective in material or workmanship, EURO-PRO Operating LLC will repair or replace it free of charge. [. . . ] This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. 08/03B 10 OPERATING INSTRUCTIONS cont. Motor Thermostat IMPORTANT: This unit is equipped with a motor protective thermostat. If for some reason the vacuum cleaner should overheat, the thermostat will automatically turn the unit off. Should this occur: · Push the On/Off button once. · Disconnect the plug from the power source. · Check the source of overheating problem. clogged hose or filter) · If clogged hose or filter is found, unclog the hose and replace the filters. · Wait at least 45 minutes before attempting to reuse the vacuum. · After unit has cooled down for 45 minutes, plug in the cleaner and push the On/Off button. · If the vacuum still does not start, contact EURO-PRO Operating LLC customer service at 1-800-798-7398. GETTING TO KNOW YOUR TRANSFORMER VAC 22 TROUBLE SHOOTING GUIDE PROBLEM 1. POSSIBLE REASON Power cord not firmly plugged into outlet. Thermostat has tripped. POSSIBLE SOLUTION 1. Turn the unit off and unplug from outlet. Allow unit to cool down, then restart. VACUUM WILL NOT OPERATE 2. 4. VACUUM WILL NOT PICK-UP OR SUCTION POWER IS WEAK 1. HEPA Filter needs cleaning or replacing. Turn unit off and unplug from wall outlet. Remove Dust Cup Filter and check for object(s) in air duct and remove. 22. TURBO BRUSH DOES NOT ROTATE OR ROTATES SLOWLY DUST ESCAPING FROM VACUUM VACUUM, HOSE OR BRUSHES WILL NOT PICK-UP 1. Dust Cup is not installed correctly. 1. Remove obstruction from hose and /or brush. [. . . ] (See illustration for cleaning instructions. ) Important: In order to ensure that maximum air suction is maintained, empty the dust cup frequently and shake out the HEPA filter and Debris Screen at the same time. Ensure that the rotating brush is kept free of hair and string which may accumulate and decrease brush performance. USING THE UNIT AS A HAND VACUUM · Press the telescopic tube release button to remove the telescopic tube. (See page 4) · Press the floor brush release button to remove the floor brush. (See page 4) · Attach the shoulder strap to the shoulder strap attachment point. [. . . ]