User manual SHARK SC620

[. . . ] OWNER'S MANUAL When using your EURO-PRO Garment Steamer, basic safety precautions should always be observed, including the following: 1. Read all instructions before using your Garment Steamer. Use the system only for its intended use. To protect against a risk of electric shock, do not immerse any part of the system in water or other liquids. [. . . ] It can be extended and retracted by adjusting the telescopic rod in its sleeve. The On/Off switch button can be foot activated to turn the power "ON" or "OFF". The ready light (green) comes on when the unit is turned "ON". The water tank is removable for easy filling and is see through for easy monitoring of the water level. The screw cap is fitted with a one way valve to ensure drip free replacement of the water tank when refilling. The Garment Steamer base houses the reservoir, water tank, hose attachment and adjustable garment rod. SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY WARNING: To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not modify the plug in any way. CAUTION: Hose can become hot during use. NEVER hold, pull or relocate unit by the hose while in use. When you need to move the steamer, hold by the garment rod. Hold the steamer head by the handgrip and never by the hose. 2 3 GETTING TO KNOW YOUR GARMENT STEAMER Components OPERATING INSTRUCTIONS Power "On" Light (green): This light will illuminate when the "ON" switch is depressed and the unit is turned on. It will remain on until the unit is turned "OFF" or until the water tank is emptied. To assemble the garment rod, insert one of the extensions into the other by depressing the button on the extension (marked C) so that you can insert into the other extension (marked D). Turn the extension until the button comes out of the opening and you hear a click. Repeat procedure for the other extension. 2) Caution: Always unplug before refilling. Important: Do NOT add cleaning solutions, scented perfumes, oils or any other chemicals to the water used in this appliance. Use tap water or distilled/purified water if the tap water in your area is very hard. Assembling Your Garment Steamer Step 1: Assembling Garment Rod 1. First attach the garment hook to the garment rod by screwing the garment hook (marked A) into the garment rod extension (marked B). 2 Once you have assembled the garment rod, insert the bottom section of the rod (marked E) into the adapter hole in the upper housing of the unit (marked F) and turn 90° until it is locked in place. 6. Garment Hook Garment Rod Extensions (3) Water Tank Power Cord Wheels Garment Brush 7. [. . . ] Simply lift the steam diffuser/handgrip upward until the hose is extended to its full height. · The gurgling will disappear when the excess moisture inside the hose has had a chance to drain back into the base. If the steamer stops producing steam then starts again: · You may wish to examine the inside of the reservoir. The attached Warranty Registration Card must be filled out and returned within 10 days of purchase. [. . . ]