User manual SHARK SV726

[. . . ] Keep charger cord away from heated surfaces. This product includes rechargeable nickel cadmium batteries. Batteries must be recycled or disposed of properly. Do not incinerate batteries or expose to high temperatures, as they may explode. [. . . ] 11/02E Printed in China 8 REPLACEMENT FILTERS Cordless Hand Vac Model SV 726 9. 6 V DC TO ORDER REPLACEMENT FILTERS OR BATTERY PACKS for Model SV726 Replacement dust cup filter SKU# XSB726 Replacement battery pack SKU# X8902 Call: 1-866-98SHARK (1-866-987-4275) Monday to Friday 8:30 A. M. Eastern Standard Time or visit our website: www. sharkvac. com FOR TECHNICAL SUPPORT In U. S. : 800-798-7398 Monday to Friday 8:30 A. M. Eastern Standard Time Please Note The Dust Cup Filter is washable. It should, however, be replaced every three (3) months to ensure peak performance of your vacuum. Important Make sure that Dust Cup Filter is completely dry before re-installing back in the hand vacuum. 1. 6. Dust Cup Container Dust cup filter Dust cup release button On/Off Button Charging Indicator Light Main Unit 7. Wall Anchor Plate (mounting screws included but not shown) NOTE: Cordless vacuum Model SV726 is shipped with the batteries uncharged. Charging of the unit for 20-24 hours prior to first use is required. 2 7 OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS Before Use 1. This cordless vacuum is powered by rechargeable nickel-cadmium batteries. Before using the vacuum, charge the vacuum cleaner for a minimum of 20 hours. NOTE: Ensure that the On/Off switch is in the "Off" position before charging. NOTE: Peak performance may only be realized after the unit has been charged and discharged two (2) or three (3) times. IMPORTANT: To maintain peak performance of your cordless hand vacuum, it is recommended that the unit be fully discharged, then completely re-charged at least once a month. Store the vacuum cleaner in the charging base when not in use so that it is always charged and ready to use. 3 TROUBLESHOOTI NG GUI DE PROBLEM POSSIBLE REASON 1. Dead battery (battery won't hold charge). Contacts between the unit and the charging stand are dirty. No power in electrical outlet supplying transformer. Assembly Note: Dust cup filter must always be used when operating the hand vacuum. To open the dust cup compartment, push the dust cup release button and remove the dust cup container. Verify that the dust cup filter is inside, then re-attach the dust cup container to the hand vacuum. Replace fuse/reset breaker. HAND VACUUM WILL NOT OPERATE MOTORIZED BRUSH WILL NOT WORK 1. [. . . ] Tuck the wiring inside the battery compartment so that the wiring does not interfere with the battery compartment cover when it is replaced. Re-install the battery strap and battery compartment cover. WARNING: NEVER use ordinary batteries for replacement, as these may leak and damage your vacuum cleaner. Changing & Cleaning the Dust Cup Filter To achieve the best performance, empty the dust cup container and clean the dust cup filter after each use. Make sure that the intended wall area for the wall mounting bracket to be drilled is free from any hidden electrical wires, water pipes and gas lines. [. . . ]