User manual SHARP *TINSZA987AWZZS6*

[. . . ] ENGLISH MODEL DK-KP80P SLIM MICRO SYSTEM OPERATION MANUAL Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. iPad, iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc. , registered in the U. S. and other countries. “Made for iPod, ” “Made for iPhone, ” and “Made for iPad” mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad respectively, and has been certified by the developer to meet Apple performance standards. [. . . ] To cancel random play: Press the PLAY MODE button again. “RDM” indicator will disappear. Notes: ● If you press the button during random play, you can move to the track selected next by the random operation. On the other hand, the button does not allow you to move to the previous track. The beginning of the track being played will be located. ● In random play, the unit will select and play tracks automatically. (You cannot select the order of the tracks. ) ■ Programmed play (MP3/WMA) enter the programming save mode. 1 While in the stop mode, press the MEMORY button to 2 Press the PRESET ( or ) button on the remote control to select the desired folder. Then press the or button on the remote control to select the desired tracks. ■ Repeat play Repeat play can play one track, all tracks or a programmed sequence continuously. To repeat one track: Press the PLAY MODE button repeatedly until “Repeat One” appears. To repeat all tracks: Press the PLAY MODE button repeatedly until “Repeat All” appears. To repeat desired tracks: Perform steps 1 - 5 in “Programmed play” section on page 7 and then press the PLAY MODE button repeatedly until “Repeat All” appears. To cancel repeat play: Press the PLAY MODE button repeatedly until “Normal” appears and “ ” disappears. Caution: After performing repeat play, be sure to press the (CD ) button. Otherwise, the disc will play continuously. 3 Press the MEMORY button to save the folder and track number. 4 Repeat steps 2 – 3 for other folder/tracks. Up to 32 tracks can be programmed. 5 Press the / (CD / ) button to start playback. To cancel the programmed play mode: During programmed stop mode, press the (CD ) button. The display will show “Memory Clear” and all the programmed contents will be cleared. E-8 Listening to a CD or MP3/WMA disc (continued) Adding tracks to the program: If a program has been previously stored, the “MEM” indicator will be displayed. Notes: ● When the disc compartment is opened, the program is automatically canceled. ● If you press the POWER ON/STAND-BY button to enter the stand-by mode or change the function from CD to another, the programmed selections will be cleared. ● During the program operation, random play is not possible. Listening to USB mass storage device/MP3 player Caution: At USB mode, once the iPod or iPhone is docked onto the unit, the iPod or iPhone will automatically start charging. ‘iPod DOCK Charge Mode’ will be displayed. In order to listen to any USB mass storage device / MP3 player, the iPod or iPhone must be removed from the docking station. [. . . ] ● Is the AC power cord of the unit plugged in?● The iPod, iPhone or iPad is not making full contact with the connector. ● The iPod or iPhone is not supported. ● iPhone is not properly docked. Symptom ● No sound is produced. Remove the iPod, iPhone, iPad, USB memory device and disc from the unit. [. . . ]