User manual SHARP 14LM-40C

[. . . ] Contents Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Supplied Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Control Panel Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Press button to increase contrast level. Press button to decrease contrast level. %5, *+71(66 &2175$67 &2/285 6+$531(66 02'( 6725( %5, *+71(66 &2175$67 &2/285 6+$531(66 02'( 6725( Note: In the Picture menu if you press Flashback ( ) button the adjustments switch themselves to the factory settings. -9- To Store the Settings Press or button on STORE option to store Picture menu settings. The stored picture mode setting will be valid only in current program. However, the other stored values in Picture Menu will be valid for all the programmes. Selecting Menu Language Menu language can be chosen by pressing or button on LANGUAGE item. TGQUDH @S 8CDG9GP8F G6IB V6B@ PAA PAA @IB GDTC %5, *+71(66 &2175$67 &2/285 6+$531(66 02'( 6725( To Store Settings 2. In Feature menu all settings are stored automatically. Installation Menu To enter the Installation menu directly, press the BLUE button, or Press M button, now you are in Main menu. Then enter the Install menu pressing or button. Feature Menu To enter the Feature menu directly, press the YELLOW button, or Press M button, now you are in Main menu. In the Main menu, select FEATURE using or button. Then enter the Feature menu pressing or button. 6281' 3, &785( 6281' )($785( 3, &785( )($785( , 167$// , 167$// 352*5$0 352*5$0 Sleep Timer As you enter the Feature menu, SLEEP TIMER will be the first selected option. Use or button to change the Sleep Timer values between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00, 1:15:00, 1:30:00, 1:45:00 and 2:00:00. It is displayed on the upper right of the screen. If sleep timer is activated it is displayed with the TV status and erased with it after 3 seconds. Selecting Programme To select programme number, you can use or button, Digit Buttons or The Double Digit button with digit buttons. Selecting Band BAND can be chosen as VHF1, VHF3 or UHF by or button. Selecting Frequency The frequency value is, 044 - 890 MHz for band VHF1 - VHF3 - UHF. TGQUDH @S 8CDG9GP8F G6IB V6B@ PAA PAA @IB GDTC QSP BS6H H@ 76I 9 AS@R V@I8` & WCA '%!$ 7B If there is left only one minute of the down counting of the timer, it is displayed automatically on the upper left of the screen, and stayed there until finishing. Then TV goes automatically to stand-by. TU6I 96S9 T@6S 8C ADI @UVI DIB TUPS @ Child Lock You can use this feature to prevent children turning on TV or changing programs or adjustments etc. The CHILD LOCK feature can be set by or button to either ON or OFF. When OFF is selected, there will be no difference in the operation of your TV. When ON is selected, the TV can only be controlled by the remote control handset. In this case, the front panel buttons (except the Power On/ Off button) will not work. FREQUENCY can be changed by or button, by the Digit buttons or by the Double Digit button with digit buttons. The decimal value in frequency can not be changed by the digit buttons, it can be changed only by the or button. Also changing Fine Tuning changes the decimal part. Selecting Standard Using or button on STANDARD, you can change the standard to B/G, D/K, L/L. Selecting Search TGQUDH @S 8CDG9GP8F G6IB V6B@ PAA PAA @IB GDTC To start the search process, press button for forward search or button for backward search. SEARCH item blinks during search process, since the process is stopped or signal is found. [. . . ] Better picture quality can be obtained if you also connect a eurocable to SCART socket. NTSC Playback Connect NTSC VCR player to SCART socket at the back of the TV. Then, press (;7 button to select SCART. - 13 - Connecting external equipment Before connecting anything Switch off all equipment. Read the manuals provided with the equipments. To select an AV mode Pressing (;7 button on the remote control selects one of AV modes (SCART, RGB) To return to the TV mode, repeatedly press (;7 button. [. . . ]