User manual SHARP 54AT-15SC

[. . . ] with either a dialogue caption or text display added to the program. Auto Shut Off Function- If there is no signal input from the antenna terminal and no user operation for 15 minutes, the TV will turn itself off automatically. V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV. S-VIDEO Input- allows you to get better picture detail and clarity for the playback of S-VHS VCR tapes, Video Discs, Satellite System, Video Game or Video Cameras. [. . . ] After completing AUTO PRESET CH, you can use CH or buttons for the memorized channels. The TV may memorize TV channels as CATV channels if the reception conditions are poor. If this happens, try the AUTO PRESET CH action again when reception conditions are better. [ADD/DELETE FUNCTION] 1) Press the MENU button so that the menu display appears on the TV screen. 2) Press the CH or button to point to "CHANNEL SET UP". 3) Press the VOL + button so that "ADD/DELETE CH" is selected. 4) Deleting a Channel: Use the CH or button to select the channel you wish to delete, then press the VOL + button so the channel number on the top right corner of the TV screen turns into RED. Adding a Channel: Use the Number buttons to input the channel you wish to add, then press the VOL + button so the channel number on the top right corner of the TV screen turns into BLUE. OR - TV SET UP PICTURE CHANNEL SET UP V-CHIP SET UP LANGUAGE [ENGLISH] CAPTION [OFF] TV SOUND [MAIN] BACK LIGHT [BRIGHT] SLEEP [ 0] MINUTE *Some cable TV systems use scrambled signals and LC-20SH1U require a special converter to receive these channels. Consult your local cable company. LANGUAGE SELECTION If you want to change the language of the on-screen menu, follow the procedure below. 1) Connect the power cord to a standard AC outlet. Note: If some digits appear in the corner of the screen, press the POWER button without unplugging the power cord. Notes: 1) When your TV receives a special effects playback signal (i. e. , Search, Slow and Still) from a VCR's video output channel (CH3 or CH4), your TV may not display the correct caption or text. 2) Captions and texts may not match the TV voice exactly. 3) Interference may cause the closed caption system not to function properly. 4) The caption or text characters will not be displayed while the menu display or functions display is shown. 5) If you see this screen: 4) Press the MENU button to exit the menu. OPERATIONS WATCHING A TV PROGRAM 1) 2) 3) 4) Press the POWER button to turn on the TV. Select the desired channel with the CH or button or the Number buttons. Adjust the volume to the desired listening level using the VOL + or ­ button. Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT". ) USING AUDIO/VIDEO INPUT JACKS When you use the AUDIO/VIDEO input jacks, select "AV1" or "AV2" mode by pressing the INPUT button. To use the jacks of AV-IN1 on the TV, select "AV1". To use the jacks of AV-IN2 on the TV, select "AV2". [. . . ] Such chemicals may cause damage and discoloration to the exposed surfaces. PROBLEM POSSIBLE REMEDY Try a new channel, if OK, then possible station trouble. Is antenna connected to terminal on the back of the set?If outside antenna is being used, check for broken wire. Turn off with POWER button and then turn it on after about a minute. [. . . ]