User manual SHARP 66GF64 OPERATION MANUAL SPLIT - PART 5 - FEATURES SETTING MODE - PAGE 22-25

[. . . ] Press the Cursor UP/DOWN buttons indicates the selected item. 7. TIMER Menu C / I to adjust the "Current time" manually. E/F to select "Programmed switch on at". The red point mark Press the Cursor LEFT/RIGHT buttons C / I to adjust the switch on. [. . . ] Press the YELLOW button to see the Timer Menu. Press the BLUE button to see the POST CODE Menu. Password: enter the 4-digit using the number buttons. It is indispensable to enter the «Password» in order to continue configuring the «Post Code». Press the BLUE button to memorize the «Password» or to have access to the next item. 5. 8. F to select «Post code». Press the Cursor RIGHT button I to select the first position. Press the Cursor UP/DOWN buttons E/F to set or Press the Cursor DOWN button change the first letter/number. Letters A to Z of the alphabet, a blank space and the numbers 0 to 9 will appear sequentially. Press the 9. the action for other letters/numbers). Press the BLUE button I button for changing the position of the cursor and E/F buttons for changing the letters (repeat this I button to quit the «Post code» box. . to memorize the «Post Code». 10. When you have finished the eighth letter, press the If you wish to cancel all the data, select «Eliminate post code and password» and press the BLUE button 12. Press the MENU button q to close the Menu. About Post code: If you memorize a «Post Code», in the event of lose or robbery of TV set and later recovery, you can identify your TV set by «Post Code». Notes: As a precautionary measure, make a note of your «Password» and the «Post Code», and keep it in a familiar place. IF YOU LOSE OR FORGET YOUR «PASSWORD», CONTACT YOUR TECHNICAL SERVICE OR DEALER. Web-site: www. sharp. co. uk/support Help Line (office hours only): 0990-274277 23 Child lock (Protection) You can lock a TV channel to prevent unsupervised TV viewing by following these procedure. The protection can apply to the television itself «LOCK ALL» or to specific programmes «LOCK PROGRAMME». [. . . ] to see the CLEAR LOCK Menu to confirm you want to clear the CLEAR LOCK Menu Notes:In order for the timed protection to function correctly, the internal TV clock must be set at the right time. To check the time setting see section - Automatic or Manual time adjustment - (page 22). When you protect one programme, all the external entries (Euro-SCART, AV-1, AV-2, Front A/V or S-Video terminals) are protected automatically. Access to protected modes LOCK ALL: When the TV is protected in this way, it will be blocked when switched on and a red box will appear on the screen (against a blue background), along with the instruction « LOCKED MODE ». [. . . ]