User manual SHARP AJ-2100

[. . . ] MODEL AJ-2100 COLOUR INKJET PRINTER SETUP GUIDE AND OPERATION MANUAL Page GETTING STARTED G SETTING UP THE PRINTER G LOADING PAPER G SETTING UP FOR Windows G 3 5 16 20 G SETTING UP FOR Macintosh 36 G APPENDIX 40 FOR CUSTOMERS IN U. K. IMPORTANT The wires in this mains lead are coloured in accordance with the following code: BLUE: Neutral BROWN: Live As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows. The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black. The wire which is coloured BROWN must be connected to the terminal which is marked with the letter L or coloured red. [. . . ] On the other hand, if your operating system is Windows 98, and your printer is connected by USB cable, select "USB port" (typically "USB-PRN0"). With a Windows98 preinstalled computer connected to this printer by USB cable If the "USB port" does not appear on the screen, install the USB driver onto your computer, following the steps shown in "Installing the USB driver (Windows 98)" (page 21). If you reinstalled the USB driver and printer driver after having uninstalled the printer driver, more than two USB ports, for example, USB-PRN0, USB-PRN1, and USB-PRN2, may be displayed on the screen as your options. In this case, select the newest port, which has the largest port number. If there are any port numbers which are not in use, the printer will work properly. the "Finish" 12 Clickprogram displaysbutton. want your Windows-based programs to use this If the "Do you printer as the default printer?", check "Yes". You have completed the installation of the printer driver. Before attempting to print a test page, align the print head by the procedure on page 32. 28 INSTALLING THE PRINTER DRIVER BY "ADD PRINTER" Installing onto Windows 2000 / NT 4. 0 The screen images on this section are those of Windows 2000. 1 2 3 Make sure that the printer is connected to your computer. Turn on the printer, and then turn on your computer. Click the "Start" button, select "Settings" and then click "Printers". 4 5 6 When the "Printers" window appears, double-click the "Add Printer" icon. On Windows 2000, "Welcome to the Add Printer Wizard" window will appear. Click the "Next" button. On Windows NT 4. 0, the screen will not appear. Go on to the next step. Check the radio button for "Local printer", and click the "Next" button. On Windows NT 4. 0, check "My Computer" and then click the "Next" button. SETTING UP FOR Windows To use this printer shared, refer to "Sharing Printer" in the online manual. 29 INSTALLING THE PRINTER DRIVER BY "ADD PRINTER" 7 Select the port to be used, and click the "Next" button. If your operating system is Windows 2000: If your printer is connected by parallel interface cable, select the LPT port (typically "LPT1"). If your printer is connected by USB cable, select the USB port (typically "USB001"). If your operating system is Windows NT 4. 0: Select the LPT port (typically "LPT1"). 8 9 Click the "Have Disk" button. Insert the supplied CD-ROM into your CD-ROM drive, type "D:\ENGLISH\WIN2000", and then click the "OK" button. On Windows NT 4. 0, type "D:\ENGLISH\WINNT40", and then click the "OK" button. (Change "D" to correspond to the letter of your CD-ROM drive. ) 10 Select the model of your printer, and then click the "Next" button. 30 INSTALLING THE PRINTER DRIVER BY "ADD PRINTER" the "Next" button. 11 Clickprogram displays "Do you want your Windows-based programs to use this If the printer as the default printer?", check "Yes". 12 Check the radio button for "Do not share this printer" and click the "Next" button. On Windows NT 4. 0, check "Not shared", and click the "Next" button. To use this printer shared, refer to "Sharing Printer" in the online manual. 13 Check "Yes", and click the "Next" button. On Windows NT 4. 0, check "Yes", and click the "Finish" button. You have completed the installation of the printer driver. 14 After confirming the message on the screen, click the "Finish" button. 15 If "Digital Signature Not Found" window appears, click the "Yes" button. This window will not affect your operation. SETTING UP FOR Windows You have completed the installation of the printer driver. Before printing align the print head by the procedure on next page. 31 ALIGNING THE PRINT HEAD Before printing for the first time or after replacing the print head, make sure to align the print head position. Follow the steps below to align the print head. 1 2 3 4 5 6 7 Make sure that A4 sized paper is set in the tray. Click the "Start" button, select "Settings" and then click "Printers". [. . . ] Upon termination you must destroy the Software and related documentation and all copies thereof. 4. Export Law Assurances. You agree and certify that neither the Software nor any other technical data received from SHARP, nor the direct product thereof, will be exported outside the United States except as authorized and as permitted by the laws and regulations of the United States. If the Software has been rightfully obtained by you outside of the United States, you agree that you will not re-export the Software nor any other technical data received from SHARP, nor the direct product thereof, except as permitted by the laws and regulations of the United States and the laws and the regulation of the jurisdiction in which you obtained the Software. 5. Government End Users. If you are acquiring the Software on behalf of any unit or agency of the United States Government, the following provisions apply. [. . . ]