User manual SHARP AJ-6000

[. . . ] MODEL AJ-6000 COLOUR INKJET COPIER OPERATION MANUAL Page GETTING STARTED SETTING UP THE UNIT LOADING PAPER OPERATION PANEL PART NAMES AND FUNCTIONS COPYING USER PROGRAM USER MAINTENANCE TROUBLESHOOTING APPENDIX 4 6 19 23 31 43 50 60 64 This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/EEG. [. . . ] The size of the annotation characters cannot be changed. The size of the annotation is not changed even if you reduce or enlarge the copy image by "Zoom" function. Selecting the print position Select a print position for your document. 1 2 Set the original on the original table and make sure that the desired size of paper is set in any of the paper trays. See page 33 to confirm the paper sizes in the unit. Press the "MENU" button, and keep pressing the (or ) "ARROW" button until "Annotation" is shown on the first line of the display panel. 11. Annotation 1. Print Pattern 3 4 Keep pressing the (or ) "ARROW" button until "Print Position" is shown on the second line of the display panel. Press the "ENTER" button. 2. Print Position 1. Top/Right 5 Keep pressing the (or ) "ARROW" button until the desired position name appears on the second line of the display panel. Select the desired value from "1. Top/Right" (Default setting), "2. Bottom/Left". 40 ADDING AN ANNOTATION ON YOUR COPY 6 Press the "ENTER" button. 2. Print Position 5. Bottom/Centre A checkmark ( ) will appear, indicating the selected position. After displaying the selected value for one second, the display will return to the ready message. 7 After the number of the copies entry, and specifying the colour mode and copy quality setting, press the "START" button ( ). You get copies with the annotation in the selected position. The desired annotation will appear on your copy output when "Annotation" is enabled. To make copies without the annotation it is necessary to select "1. None" for the "Print Pattern" setting. Bottom/Left" for the "Print Position" when making reduced copy, the annotation is placed off the normal position. Guaranteed area and printable area This unit can copy onto the following area of the paper. To make a clear copy, it is recommended to fit the original image within the quality guaranteed area. 3mm 3mm 3mm 19mm Quality guaranteed area Printable area Paper size 19mm 3mm 10mm 10mm 41 ADDING AN ANNOTATION ON YOUR COPY The print position of the annotation 14mm The print position of each value 1. Top/Right 4. Bottom/Right 2. Top/Centre 5. Bottom/Centre 3. Top/Left 6. Bottom/Left Paper size 14mm 42 USER PROGRAM Depending on the user environment, you can save regularly used settings, and change the factory default settings to suit individual conditions. SAVING THE USER DEFAULT SETTING You can save the current settings on the unit as user default settings. You can save the following settings as user default settings; colour mode, copy quality, brightness, intensity, zoom, and original type. These settings will remain even after once the power is turned off. (See the next page. ) 1 Press the "MENU" button, and keep pressing the (or ) "ARROW" button until "Feature Defaults" is shown on the first line of the display panel. 4. Feature Defaults 1. Save new 2 3 Keep pressing the (or ) "ARROW" buttons until "Save new" is shown on the second line of the display panel. Press the "ENTER" button. Save the current settings as the user default settings. The following message will appear for one second after the "ENTER" button is pressed. The unit will soon return to be ready. Saving new default settings. . . !If you do not save the desired settings by "Save new", the previous settings set as defaults will remain in effect. The following settings are saved each time they are specified, and cannot return to the default settings unless you run the Reset Factory function; "Program Timeout", "Sleep Mode", "Paper Default" and "Language". 43 SAVING THE USER DEFAULT SETTING The condition of the setting values Factory default setting User default setting Program timeout mode starts "Reset Factory" After pressing twice the "CLEAR/STOP" (See page 48) button ( ) After turning off the power Setting option Colour mode Copy quality Brightness Intensity Zoom Original Type Paper Type Paper Size Copy Quantity Program Timeout Sleep Mode Paper Default Setting Language Annotation COLOUR The third indicator 3. Top/Right Saving the "Feature Defaults" Setting value is saved as a user default setting. Return to user default Resetting the settings. [. . . ] 11 Power socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6, 8, 12, 16, 52, 60 Print head latch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13, 53 Print pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Print position . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]