User manual SHARP AJ-6010

[. . . ] MODEL AJ-6010 COLOUR INKJET MULTIFUNCTION SETUP GUIDE AND OPERATION MANUAL Page INTRODUCTION SETTING UP THE UNIT LOADING PAPER INSTALLING THE SOFTWARE OPERATION PANEL MAKING COPIES FUNCTIONS SET BY THE USER USING THIS UNIT WITH YOUR COMPUTER USER MAINTENANCE TROUBLESHOOTING APPENDIX 4 6 20 25 38 41 53 59 61 68 72 This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/23/EEG, gewijzigd door 93/68/EEG. [. . . ] If you want to change the number of copies, press the "CLEAR/STOP" button ( ) and set the required number of copies. How to select colour or black/white copy You can switch modes by pressing the "COLOUR MODE" button. When the upper colour mode indicator is illuminated, the unit will copy in multicolour. When the lower indicator is illuminated, the unit will copy in black and white. Default setting is "COLOUR" How to select the copy quality Copy quality can be selected in four increments. You can select the copy quality by pressing the "COPY QUALITY" button. The selections allow you to trade off between speed and image quality. Default setting Example: Moving the indicator upward increases the speed but decreases the image quality. !Some of the quality settings cannot be selected depending on the "Paper Type". To copy a monochrome original with the "best" quality, the unit uses colour ink even if in the "BLACK/WHITE MODE". To make a clear copy, use the "COLOUR MODE". 45 REDUCING/ENLARGING THE IMAGE SIZE FOR COPYING The image size can be reduced/enlarged for copying between 25% and 400%. Functions such as "Poster", "Repeat Image", and "Mirror" are available. 1 Press the "ZOOM" button, and then repeatedly press the "ARROW" buttons until the desired function is displayed. or 5. Repeat Image 100% + The default settings of reducing/enlarging operation are shown below. AutoFit Default 100% *91% Description 4. Double Size 400% 100% 100% 50% *70% *81% *115% *141% *64% *78% *95% *129% *200% Displays the paper size currently selected. (Reduces/enlarges the size of the output image to fit the printable area of the paper loaded in the unit. ) Enlarges the size of the image for printing onto multiple pages. (See next page) Copies multiple pages onto a single page. Copies the original as mirror image. These values are available when A4 sized paper is selected as default. (See page 55) These values are available when 8. 5" x 11" sized paper is selected as default. (See page 55) Doubles both the length and width. or "ARROW" buttons, the setting name * When these values are changed using the will be changed to "Variable". !Reduction/enlargement copy ratios cannot be specified when "AutoFit" is selected. The "Poster" setting is unavailable when copying from the bypass tray. 46 REDUCING/ENLARGING THE IMAGE SIZE FOR COPYING Example:"Poster" setting Original For this example the enlargement is set to 200%. In the example, the printable area of the original image is enlarged by 200%. The machine will automatically determine the required number of copy sheets required to contain the composite image. To assemble the sheets to make the final poster, it will be necessary to trim the edges of the paper. Copy Trim the margin area. Overlap area Example:"Repeat Image" setting Connect all the pages. Original Example:"Mirror" setting Copy Original Copy 47 REDUCING/ENLARGING THE IMAGE SIZE FOR COPYING 2 To change the reduction/enlargement ratio, repeatedly press the or "ARROW" buttons, and set the reduction/enlargement ratio to the desired setting (25% to 400%). 5. Repeat Image 30% + 3 Press the "ENTER" button. A checkmark ( ) will appear, indicating the selected value. After displaying the selected value for one second, the display will return to the ready message. 5. Repeat Image 30% + Ready to Copy R 30% A4 0 To make quick zoom ratio adjustments 1 2 Press the "ZOOM" button, and then repeatedly press the or "ARROW" buttons until the preset ratio which is near to the desired value is displayed. [. . . ] Upon termination you must destroy the Software and related documentation and all copies thereof. 4. Export Law Assurances. You agree and certify that neither the Software nor any other technical data received from SHARP, nor the direct product thereof, will be exported outside the United States except as authorized and as permitted by the laws and regulations of the United States. If the Software has been rightfully obtained by you outside of the United States, you agree that you will not re-export the Software nor any other technical data received from SHARP, nor the direct product thereof, except as permitted by the laws and regulations of the United States and the laws and the regulation of the jurisdiction in which you obtained the Software. 5. Government End Users. If you are acquiring the Software on behalf of any unit or agency of the United States Government, the following provisions apply. [. . . ]