User manual SHARP AL-2051

[. . . ] The equipment should be installed near an accessible socket outlet for easy disconnection. The mains lead of this equipment is already fitted with a mains plug which is either a non-rewireable (moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or ASTA approved fuse and of the same rating as the one removed from the plug must to BS1362 marked or be used. Always refit the fuse cover after replacing the fuse on the moulded plug. [. . . ] Do not use extension cords or power strips. About the scan head The scan head lamp remains on constantly when the unit is in the ready condition (when the start ( ) indicator is illuminated). The unit adjusts the scan head lamp periodically to maintain copying quality. At this time, the scan head moves automatically. This is normal and does not indicate unit trouble. Detailed explanations of the functions that can be used on the machine are provided in the Operation Guide in PDF format. Adobe® Reader® can be downloaded from the following URL: http://www. A paper form operation manul can be obtained from your authorized SHARP dealder or upon request by contacting SHARP. 78 Please inform the model name, the serial number of the machine and the language needed. Do not forget to add your name and your address. 5 mm (along other edges Copy size in total) Max. (A4 one-sided copying at 100% copy ratio) Continuous copy Max. 7 seconds (When user program 24 is set to ON) First-copy time*2 (paper: A4, exposure mode: AUTO, copy ratio: 100%) Warm-up time*3 Approx. Document glass: Variable: 25% to 400% in 1% increments (total 376 steps) Fixed preset: 25 %, 50 %, 70 %, 86 %, 100 %, 141 % Copy ratio RSPF: Variable: 50% to 200% in 1% increments (total 151 steps) Fixed preset: 50 %, 70 %, 86 %, 100 %, 141 %, 200 % Document glass: Moving optical source, slit Exposure system exposure (stationary platen) with automatic exposure function RSPF: Moving original One automatic feeding paper tray and one optional Paper feed paper tray (250 sheets each) + bypass tray (50 sheets) Fusing system Heat rollers Developer system Magnetic brush development Tri-color CCD light source (CCD: 3 components; R, Light source G, and B) Scan: 600 x 300 dpi Output: 600 x 600 dpi (AUTO/ Resolution TEXT mode) Scan: 600 x 600 dpi Output: 600 x 600 dpi (PHOTO mode) Gradation 256 tones (8 bits) Local voltage ±10% (For this copier's power supply Power supply requirement, see the name plate located on the back of the unit. 7 B Standby mode: - (*) Sound pressure level LpAm (reference) (Bystander positions) Noise level Copying mode: 51 dB Standby mode: - (*) (*) = Less than background noise Noise emission measurement in accordance with ISO7779. Model Type Photoconductive type Document glass type Copy/printing system Originals Originals size *1 When making multiple duplex copies, the copy speed will vary based on the environment conditions. *2 First copy time may vary depending on the status of the machine. Type Scanning method Flatbed scanner Document glass/RSPF Tri-color CCD light source Light source (CCD: 3 components; R, G, and B) Basic: 600 dpi x 600 dpi Resolution Setting range: 50 dpi - 9600 dpi Original types Sheet media, books Effective scanning area 216 mm (Lengthwise) x 356 mm (Width) Scanning speed 2. 0 Interface (Full-Speed/Hi-Speed compatible interface) Drop out color Yes Supported operating Windows 2000 Professional/XP/Vista/7 systems Void area None [USB cable] USB cable that supports USB 2. As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. [. . . ] Do not look directly at the light source. After turning the machine off, wait 10 to 15 seconds before turning it back on. Machine power must be turned off before installing any supplies. When the machine is not used for a long time, for example for consecutive holidays, turn the power switch off and remove the power cord from the outlet. [. . . ]