User manual SHARP AL-2061

[. . . ] The equipment should be installed near an accessible socket outlet for easy disconnection. The mains lead of this equipment is already fitted with a mains plug which is either a non-rewireable (moulded) or a rewireable type. Should the fuse need to be replaced, a BSI or ASTA approved fuse and of the same rating as the one removed from the plug must to BS1362 marked or be used. Always refit the fuse cover after replacing the fuse on the moulded plug. [. . . ] Be sure not to plug this telephone line cord into the "TEL" jack. The "TEL" jack is used to attach an extension telephone or answering machine to the machine. How to use the operation guide Detailed explanations of the functions that can be used on the machine are provided in the Operation Guide in PDF format. If your area experiences a high incidence of lightning or power surges, we recommend that you install surge protectors for the power and telephone lines. Surge protectors can be purchased from your retailer or at most telephone specialty stores. If desired, an answering machine or external telephone can be connected to the machine through the telephone jack, labeled "TEL, " on the rear of the machine. Connecting an answering machine to the machine allows you to receive both voice and fax messages when you are out. To use this feature, first change the outgoing message of your answering machine, and then set the reception mode of the machine to "A. Adobe® Reader® can be downloaded from the following URL: http://www. If you are using distinctive ringing with an answering machine, you do not need to follow the procedure described below. (Please note that when distinctive ringing is used, the answering machine must be distinctive ring compatible. A paper form operation manul can be obtained from your authorized SHARP dealder or upon request by contacting SHARP. 78 Please inform the model name, the serial number of the machine and the language needed. Do not forget to add your name and your address. Model Type Photoconductive type Document glass type Copy/printing system Originals Originals size Copy size Copying speed*1 Continuous copy First-copy time*2 Warm-up time*3 Copy ratio AL-2061 Digital Multifunctional System, Desktop OPC drum Fixed Dry, electrostatic transfer Sheets, bound documents Max. 7 seconds (When user program 24 is set to ON) (paper: A4, exposure mode: AUTO, copy ratio: 100%) Approx. Document glass: Variable: 25% to 400% in 1% increments (total 376 steps) Fixed preset: 25 %, 50 %, 70 %, 86 %, 100 %, 141 %, 200 %, 400% RSPF: Variable: 50% to 200% in 1% increments (total 151 steps) Fixed preset: 50 %, 70 %, 86 %, 100 %, 141 %, 200 % Document glass: Moving optical source, slit exposure (stationary platen) with automatic exposure function RSPF: Moving original One automatic feeding paper tray and one optional paper tray (250 sheets each) + bypass tray (50 sheets) Heat rollers Magnetic brush development Tri-color CCD light source (CCD: 3 components; R, G, and B) Scan: 600 x 300 dpi Output: 600 x 600 dpi (AUTO/TEXT mode) Scan: 600 x 600 dpi Output: 600 x 600 dpi (PHOTO mode) 256 tones (8 bits) Local voltage ±10% (For this copier's power supply requirement, see the name plate located on the back of the unit. 7 B Standby mode: - (*) Sound pressure level LpAm (reference) (Bystander positions) Copying mode: 51 dB Standby mode: - (*) (*) = Less than background noise Noise emission measurement in accordance with ISO7779. Type Scanning method Light source Resolution Original types Effective scanning area Scanning speed Input Data Output Data Scanning colors Protocol Interface Drop out color Supported operating systems Void area Interface cables Scanner utilities Flatbed scanner Document glass/RSPF Tri-color CCD light source (CCD: 3 components; R, G, and B) Basic: 600 dpi x 600 dpi Setting range: 50 dpi - 9600 dpi Sheet media, books 216 mm (Lengthwise) x 356 mm (Width) 2. Applicable telephone line Compression method Transmission modes Scanning method Scanning resolution (supports ITU-T standards) Recording method Transmission speed Transmission time Paper size Effective recording width Public switched telephone network MH, MR, MMR, JBIG Super G3, G3 (the machine can only send faxes to and receive faxes from machines that support G3 or Super G3) CCD flatbed scanning 8 x 3. When using the RSPF Maximum One-sided original: 216 mm x 500 mm Two-sided original: 216 mm x 356 mm Minimum 216 mm x 140 mm When using the document glass Maximum A4 216 mm maximum 256 levels Light, Medium, Dark Possible (1 telephone) Combined total of 18 One-Touch Dial and Group keys; 100 Speed Dial numbers; redialing (automatic) Yes Yes (50 pages) 2 MB Yes *1 When making multiple duplex copies, the copy speed will vary based on the environment conditions. *2 First copy time may vary depending on the status of the machine. [. . . ] There may be a remote risk of electric shock from lightning. Do not use a telephone to report a gas leak in the vicinity of the leak. Do not install or use the machine near water, or when you are wet. Take care not to spill any liquids on the machine. [. . . ]