User manual SHARP AN-3DG20

[. . . ] · Do not move around while wearing the 3D Glasses. The surrounding area appears dark, which may result in falling or other accidents that may cause injury. Caring for the 3D Glasses · Use only the cloth provided with the 3D Glasses to clean the lenses. Any dust or other soiling on the cloth may result in scratches on the product. Do not use solvents such as benzene or thinners as doing so may cause the coating to peel off. [. . . ] Viewing 3D images may cause you to misjudge the distance to the TV screen and accidentally strike the screen, resulting in possible injury. · It is recommended that you do not view 3D images if you are sleep deprived or if you have been drinking alcohol. Supplied Accessories Make sure the following accessories are provided with the 3D Glasses. 3D Glasses (×1) Nose pad *1 (Large ×1, small ×1) USB cable *2 (×1) Operation manual (this publication) Glasses case (×1) I J Cleaning cloth (×1) Use the 3D Glasses nose pad as needed. The supplied USB cable is a dedicated cable for the 3D Glasses (AN-3DG20). It does not operate when connecting with other USB devices. NOTE · The illustrations above are for explanation purposes and may vary slightly from the actual accessories. GB-3 Using the 3D Glasses Part names 5 1 2 3 4 1 Infrared receiver Receives an infrared signal sent from the TV. The 3D Glasses turn off automatically after 10 minutes if no signal is received from the TV. 5 Nose pad mount The dedicated nose pad can be mounted here. NOTE · Do not soil or apply stickers or other obstacles to the infrared receiver. Doing so may block signals from the TV and prevent the 3D Glasses from working correctly. · Interference from other infrared communications equipment may prevent you from viewing 3D images correctly. 2 Power-supply terminal This terminal is for recharging. 3 3D/2D/OFF Switch This button switches between 2D and 3D modes. 4 LED light Blinks once every second when the battery power is low. Attaching the Nose Pad Attach either of the supplied nose pads as needed (such as when the glasses do not fit properly). The glasses come with a large and small nose pad. Using the 3D Glasses 1 1 Turning On/Off the Power Slide the switch to 3D to turn on the power. Slide the switch to OFF to turn off the power. 2 Attaching the nose pad Removing the nose pad NOTE · When the battery power is low, the LED light blinks once every second after the power is turned on. GB-4 Using the 3D Glasses Switching to 3D and 2D Mode When viewing 3D images, you can slide the switch between 2D and 3D modes. This is useful when several people are viewing 3D images on the same TV with some people wanting to watch in 3D and some people wanting to watch in 2D. 3 After the recharge has completed, turn off the TV, and then remove the USB cable from the 3D glasses. Viewing 2D images When you slide the switch to 2D while viewing 3D images, the 3D images switch to 2D images. Viewing 3D images When you slide the switch to 3D while viewing 2D images, the 2D images switch to 3D images. 1 USB cable (supplied accessory) 2 Power-supply terminal Usage Range of the 3D Glasses The 3D Glasses can be used by receiving an infrared signal sent from the TV. The 3D Glasses turn off automatically after 10 minutes if no signal is received from the TV. CAUTION · Do not recharge while wearing the 3D glasses. NOTE · Be sure to turn on the TV when you recharge the 3D glasses battery. If the TV is turned off, you may not recharge it. · When you recharge the 3D glasses battery, only connect the USB cable (supplied accessory) to a USB terminal on the TV. · The battery will not recharge during usage with the USB cable connected. · Recharge the battery within the operating temperature (10°C­40°C). The battery may not be able to recharge outside of the operating temperature. Operating range From directly in front of the 3D infrared emitter on the TV: approx. 30° horizontally and 20° vertically) Recharging the 3D glasses battery When the battery power is low, the LED light blinks one time per second. If the 3D glasses battery runs out, you can recharge the 3D glasses battery by connecting the supplied USB cable to the TV and the power-supply terminal on the 3D glasses. 1 2 Using the 3D glasses with an external power supply You can use the 3D glasses with an external power supply when you slide the switch on the 3D glasses to 3D or 2D after steps 1 and 2 in Recharging the 3D glasses battery (recharging will not complete). Turn off the TV, and then slide the switch on the 3D glasses to OFF. [. . . ] SHARP's involvement in this program is part our commitment to preserving our environment and conserving our natural resources. (RBRCTM is a trademark of the Rechargeable Battery Recycling Corporation. ) NOTE · Please contact your local authority for the correct method of disposal of this product and/or packing (refer to page 8 for details). GB-7 Using the 3D Glasses End of life disposal Information on Disposal for Users This equipment contains an integrated battery which cannot be removed by the user. If the life of the integrated battery has ended, because recharging is no more possible, this equipment must be taken to a Sharp Service Point in order to have it prepared for a proper removal of the battery and separate proper recycling of the battery and the equipment. So please contact a Sharp Service Point for this. [. . . ]