User manual SHARP AR-620N

[. . . ] While all reasonable efforts have been made to make this document as accurate and helpful as possible, we make no warranty of any kind, expressed or implied, as to the accuracy or completeness of the information contained herein. The most up-to-date drivers and manuals are available from the Sharp web site: www. sharpusa. com Copyright © 2005 Sharp and Electronics for Imaging, Inc. This publication is protected by copyright, and all rights are reserved. No part of it may be reproduced or transmitted in any form or by any means for any purpose without express prior written consent from Sharp Electronics Corporation. [. . . ] To determine the frame types that were successfully bound, save your changes, exit Setup, restart the Fiery, and print a Configuration page. The Configuration page lists only one of the frame types that were successfully bound. If you answer No to this option, you can select frame types manually. You must choose at least one frame type to enable IPX/SPX protocols. The frame selection screen allows you to make multiple selections. Depending on your Port Setup selection, only Ethernet frame types or all frame types are displayed. Press [ENTER] for each frame type used on your IPX/SPX network. An asterisk (*) appears beside each selected frame type. Press the line selection button again to cancel a selected frame type. Use the up and down arrow buttons to scroll to additional frame types. The Fiery binds to each frame type as you select it. Navigate the NDS tree to User Login object. This message is displayed if you selected Yes for the previous option. Choose Yes and browse the NDS tree, as described in the following paragraphs. NDS Tree name Object list, ". . " Browsing to find the User Login object begins with the NDS tree that you selected previously (with Select NDS Tree). Use the up and down arrow buttons to scroll through a list of objects in the tree beneath the [Root] in the hierarchy, or use the navigation symbol ". . " to go up one level at a time. In each subsequent browse screen, the top line represents your current location. The second line contains: · A list of objects in the current container directly below your current location · The symbol ". . " to go up one level With an object selected, printer Enter to travel down the tree, or choose ". . " to go up the tree. When you select an object and press Enter, that object is displayed on the top line, and the second line lists objects directly below it. Continue to browse the NDS tree until the User Login object is displayed in the second line and press Enter. Sharp AR-620N EFI Configuration Guide - 82 4 4-83 Network Setup options Enter Password Enter the login password for the NDS tree, using the up and down arrow buttons to select characters, and the Enter button to advance the cursor. Press Enter to complete the password entry. Choose Yes to browse the NDS tree to the Print Server object. [. . . ] Login does not exist. The server has connected to a file server, but is unable to log in to the server because the selected login account does not exist on the file server. Sharp AR-620N EFI Configuration Guide - 166 A Novell error 255 Unable to connect to file server. File server is down or out of connections. nnn Notify IPX (Novell) Administrator. A-167 Troubleshooting the Fiery Cause The Novell file server is down or out of connections. This error occurs while the server is trying to connect to the requested file server. [. . . ]