User manual SHARP AR-C262M/BC320

[. . . ] INSTALLATION/ TWAIN DRIVER OPERATION MANUAL AR-C260/BC320 Series MODEL AR-C262M AR-BC320 DIGITAL FULL COLOUR MULTIFUNCTIONAL SYSTEM Page 1 · INTRODUCTION 3 · ABOUT THE CD-ROM · INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION) 4 · UNINSTALLING PRINTER DRIVERS AND PRINTER UTILITIES 16 · INSTALLING PRINTER DRIVERS USING THE "ADD PRINTER WIZARD" 17 · INSTALLING AND USING 19 THE TWAIN DRIVER · CONNECTING THE MACHINE 24 TO YOUR COMPUTER Be sure to become thoroughly familiar with this manual to gain the maximum benefit from the product. Before installing this product, be sure to read the installation requirements and cautions sections of the "Operation manual (for general information and copier operation)". Be sure to keep all operation manuals handy for reference including this manual, the "Operation manual (for general information and copier operation)" and operation manuals for any optional equipment which has been installed. The CE mark logo label is affixed on an equipment in case that the directives described in the above sentence are applicable to the product. (This sentence is not applicable in any country where the above directives are not required. ) Warning: This is a Class A product. [. . . ] If you installed the scanner driver, read the separate supplementary manual after completing installation. G If you wish to install the printer administration utility, click the [Administrator Tools] button in this window and then click the [Printer Administration Utility] button and follow the on-screen instructions. If you wish to directly specify the IP address, click the [Specify Address] button, enter the IP address, and click the [Search] button. Be sure to ask your network administrator for the correct IP address to be entered. 11A confirmation window will appear. Read the contents and click the [Next] button. 8 INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION) 12 Select the printer driver being installed as the default printer and click the [Next] button. the printer name 13 Whenthe [Next] button. window appears, click If you wish to change the printer name, enter the desired name. 15 Check the contents of the window and click the [Next] button. Installation of the printer driver begins. NOTE When you are using Windows 2000/XP/Server 2003 If a warning message regarding the Windows logo test or digital signature appears, be sure to click the [Continue Anyway] or [Yes] button. 14 When you are asked if you wish to install the display font, select an answer and click the [Next] button. the finish setup 16 Whenthe [OK] button. window appears, click 17 Click the [Close] button. NOTE A message prompting you to restart your computer may appear after installation is finished. If this message appears, click [Yes] to restart your computer. This completes the installation. 9 INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION) I Using the machine as a shared printer via a server If the printer server in a Windows NT server environment, NetWare server environment, or other environment is configured to share the printer (the machine), follow the steps below to install the printer driver in each client computer. Ask your network administrator for the server name and printer name of the machine on the network. NOTE For the procedure for configuring settings in the printer server, see the operating system manual or Help. The "printer server" explained here is a computer that is connected to the machine, and "clients" are other computers connected to the same network as the printer server. through 8 of "Installing 1 Perform steps 1 (Custom installation)" on the printer driver page 8. the [Shared Printer] and click the 2 Select button. [Next] port selection window, 5 In the printerprinter that is shared andverify the network click the [Next] button. select 6 When you are asked tothat youthe model name, select the model are using and click the [Next] button. 3 When you are asked to select the printer port to be used, click the [Add Network Port] button. 7 Perform step 12 through 17 of "Installing the printer driver (custom installation)" on page 9. This completes the installation. network printer 4 Select thethe [OK] button. that is shared and click Ask your network administrator for the server name and printer name of the machine on the network. 10 INSTALLING THE PRINTER DRIVER AND UTILITIES (SOFTWARE INSTALLATION) Installation method 2 Use this procedure to install the software in the following environments: 1. The printer is connected by USB cable or parallel cable. Windows version: Windows XP/Server 2003 NOTE To install this software, you must have administrator's rights. Installing the software in Windows XP/Server 2003 (USB/parallel interface) Install the software as follows. Before starting the installation, make sure the USB or parallel interface cable is not connected to the machine. 1 Insert the "Software CD-ROM" that accompanied the machine into your CDROM drive. 7 Click the [Next] button. 8 Click the [Custom installation] button. 2 Click the [start] button, select [My Computer], and then double-click the CDROM icon. 3 Double-click the [SETUP] icon. Agreement 4 The Licence sure that youwindow will appear. Make understand the contents of the licence agreement, and then click the [Yes] button. 5 After confirming the "Welcome" window, button. message in the click the [Next] the [Connected to 9 Clickclick the [Next] button. this and computer] button. [. . . ] The procedure for setting the IP address using the "TWAIN IP Selector" is explained below. select 1 Click the "Start" button and C", and "Programs", "SHARP MFP TWAIN "TWAIN IP Selector". The "Selector" window appears. 4 Check "IP address" and "Name" shown in the "Selector" window. If you need to change the name, click the "Update" button. 2 The "Add New Address" window appears and the machine is automatically detected on the network. Click the "Add" button. This completes the procedure for setting the IP address. the machine that 3 Select "IP address" of the "OK" button. you are using and click Be sure to ask your network administrator for the IP address. 21 INSTALLING AND USING THE TWAIN DRIVER Scanning with the TWAIN driver The TWAIN driver (SHARP MFP TWAIN C) complies with the international TWAIN standard and can be used with many TWAIN-compliant software applications. The example of scanning with Imaging* in Windows 2000 is explained below. Follow the same steps to scan with other applications in other operating systems. [. . . ]