User manual SHARP AR-FX2

[. . . ] For detailed information see the "Table of possibilities for simultaneous processing under multi access" in this section. Load paper, and printing continues with the data that was being printed before the paper ran out. For information about using the copier, fax, and printer functions, and related cautions, see the appropriate manual. 1 MULTI ACCESS About Copier Mode/Fax Mode You can change between copier mode and fax mode. To change modes, press the COPY/FAX key. FAX indicator COPY indicator COPY/FAX key The function of some operation panel keys and indicators depends on the mode selected. For detailed information, see manual for the function you are using. [Copier mode] [COPY/FAX key] [Fax mode] : You can use the copier function. [. . . ] 6 ) Yes Yes Direct sending No Yes __ No No (P. 6 -7) No Fax sending Scanning a document for Memory sending memory sending No Yes No __ Yes Yes (P. 6 -4) No Yes Yes No Yes __ No Yes No No Fax Sending Direct Sending Scanning a document for memory sending Memory sending Fax Reception Normal reception Printing received data Substitute reception Telephone Conversation in progress Desired job Current job Copy Printer Copying Printing Normal reception No (P. 4 ) No (P. 6 -5) No No Fax Reception Printing received data No (P. 4 ) No (P. 6 -6) Yes Yes __ Yes Yes Substitute reception Yes (P. 6 -4) No No Yes __ No Telephone Calling Receiving a call Yes (P. 4 ) Yes (P. 5 ) No Yes (P. 5 ) No No Yes (P. 6 ) No __ -1) Yes (P. 6 -2) No Fax Sending Direct Sending Scanning a document for memory sending Memory sending Fax Reception Normal reception Printing received data Substitute reception Telephone Conversation in progress (P. You can perform multi access depending on the conditions No . . . . . . You cannot perform multi access 3 MULTI ACCESS Printing data during copying Print data is received, but cannot be printed right away, because copying has priority. When copying is finished the print data is printed under any of the following conditions. q You press the CLEAR ALL key q The auto clear time elapses (when set *) q 60 seconds elapses (when the auto clear time is not set *) Normal fax reception during copying Faxes are automatically received with substitute reception during copying. When copying is finished the faxes printed under any of the following conditions. q You press the CLEAR ALL key q The auto clear time elapses (when set *) q 60 seconds elapses (when the auto clear time is not set *) Printing received data during copying Received data cannot be printed right away, because copying has priority. When copying is finished the received data is printed under any of the following conditions. q You press the CLEAR ALL key q The auto clear time elapses (when set *) q 60 seconds elapses (when the auto clear time is not set *) Receiving a telephone call during copying You can receive a telephone call during copying. If the telephone call is a fax transmission you can interrupt the copy job to receive the fax. To interrupt the copy job to receive a fax, perform the following steps. 1 2 3 4 Press the CLEAR ALL key or the CLEAR key to interrupt copying. If there are documents in the single pass feeder or on the original table, remove them. Press the COPY/FAX key to select fax mode. Press the START key. Receving begins. Performing a copy job during printing When using copier mode or when selecting copier mode from fax mode, you can peform a copying job. Pending print data is held and after copying is finished, printing resumes. [. . . ] The print data is printed after the received fax data finishes printing. Receiving a telephone call during the printing of received fax data You can receive a telephone call while printing received fax data. If the telephone call is a fax transmission you can interrupt the printing of received fax data to receive the incoming fax. To interrupt the printing of received fax data to receive a fax, perform the following steps. 1 2 3 Confirm that fax mode is selected. (If the unit is in copier mode, press the COPY/FAX key) If there are documents in the single pass feeder or on the original table, remove them. Press the START key. Receiving begins. Other combinations of operations -1 When an extension telephone is connected to the unit you can make a telephone call from the extension telephone. -2 When an extension telephone is connected to the unit, you can make a telephone call from the extension telephone. -3 The received fax data is printed after the data printing finishes. -4 When scanning multiples sheets of originals, the time needed to scan each sheet may be longer than that in a normal operation. -5 Automatically changes to substitute reception. -6 Because scanning has priority, the printing of received fax data may be suspended until all of the scanning is finished. -7 The unit is busy with the current operation, therefore the direct sending job must wait. [. . . ]