User manual SHARP AR-M700N

[. . . ] MODEL AR-M550U AR-M620U AR-M700U AR-M550N AR-M620N AR-M700N DIGITAL LASER COPIER/PRINTER DIGITAL MULTIFUNCTIONAL SYSTEM OPERATION MANUAL (for general information and copier operation) Page PART 1: GENERAL INFORMATION BEFORE USING THE PRODUCT MANAGING THE MACHINE PERIPHERAL DEVICES PART 2: COPIER OPERATION 1-1 2-1 3-1 4-1 5-1 6-1 7-1 8-1 MAKING COPIES CONVENIENT COPY FUNCTIONS MACHINE MAINTENANCE (FOR COPYING) DOCUMENT FILING FUNCTION SPECIFICATIONS Be sure to become thoroughly familiar with this manual to gain the maximum benefit from the product. Before installing this product, be sure to read the installation requirements and cautions sections. Be sure to keep all operation manuals handy for reference including this manual, the "Operation manual (for general information and copier operation)" and operation manuals for any optional equipment which has been installed. (Option) Saddle stitch finisher + Punch module + Inserter + Large capacity tray In some areas, the "POWER" switch positions are marked "I" and " " on the copier instead of "ON" and "OFF". The symbol " " denotes the copier is not completely de-energized but in a stand-by condition at this "POWER" switch position. [. . . ] The order of copying will be automatically adjusted by the machine. G Either left binding (right to left turning) or right binding (left to right turning) can be selected. G Four originals will be copied onto one sheet. Blank pages may be automatically produced at the end depending on the number of the originals. G If a saddle stitch finisher is installed, copies can be stapled in two positions along the centre of copies and folded at the centre. Right binding First page To display the special modes screen. . . See "General procedure for using special functions" on page 5-2. 3 Select the binding position (left binding or right binding). LEFT BINDING RIGHT BINDING C SE 1 Touch the [PAMPHLET COPY] key on the special modes screen. SPECI L MODES MARGIN SHIFT ERASE PAMPHLET COPY JOB BUILD The PAMPHLET COPY setting screen will appear. The pamphlet copy icon ( , etc. ) will also appear in the upper left corner of the screen to indicate that the function is turned on. If you wish to insert a different type of paper for use as a cover, follow steps 4 through 12 below. If you do not wish to insert paper for a cover, continue from step 8 on the next page. type of originals 2 Designate the or 2-sided. copied: 1-sided ORIGINAL 1-SIDED 2-SIDED to be 4 Touch the [COVER SETTING] key. CANCEL OK Select the [2-SIDED] key if you wish to scan a two-sided original using the automatic document feeding function. NG RIGHT BINDING COVER SETTING 5-6 SPECIAL MODES not you 5 Select whether oror "NO"). wish to copy on the cover ("YES" PRINT ON COVER YES NO the original in the document feeder 9 Place the document glass. (page 4-3) or on 10Ensure that the desired paper size has been automatically selected based on the original size. To select another size paper, select the desired size and touch the [AUTO IMAGE] key. The appropriate copy ratio will be selected 100% automatically based on the original size and the paper size. (See steps 2 and 3 on page 4-15. ) AUTO A3 PAPER SELECT 6 Select the paper tray for the cover. CANCEL OK PAPER TRAY BYPASS TRAY A4 PLAIN The currently selected paper tray for the cover is displayed. 2 The size and type of paper in the currently selected tray is displayed. 1 as 11Select any desired copy settings suchand the exposure or number of copies, then press the [START] key. In the example screen above, A4 (8-1/2" x 11") size plain paper is loaded. To change the paper tray for the cover, touch the tray selection key. (In the screen example, the "BYPASS TRAY" display is the tray selection key. ) The tray selection screen appears when the tray selection key is touched. NOTES G When the cover paper is fed from the inserter, the cover cannot be copied on. G Two-sided copying is not possible on label sheets, transparency film, and tabbed paper. When copying on a cover, do not select a tray that has one of these types of paper. 12[When using feeder:] the automatic document Copying will start after all originals have been scanned. (The next step is not needed. ) [When using the document glass:] Replace the original with the next original and press the [START] key. Repeat this operation until all originals have been scanned and then touch the [READ-END] key. NOTES G When the pamphlet copy function is set, the twosided copying mode will be automatically selected. G If this function is used in combination with the pamphlet copy function (pamphlet stapling) and the number of origial pages exceeds the number of pages that can be stapled, a message asking you to select "CANCEL", "CONTINUE", or "DIVIDE" will appear. [. . . ] 6-3 -Document filing function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-28 -Finisher/saddle stitch finisher. . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13 -General information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-26 to 2-28 -Inserter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]