User manual SHARP AR-122EN

[. . . ] AR-153E N AR-152E N AR-122E N OPERATION MANUAL BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUAL DE INSTRUCCIONES MANUALE DI ISTRUZIONI I COPIATRICE LASER DIGITALE E COPIADORA LÁSER DIGITAL F COPIEUR LASER NUMERIQUE D DIGITALER LASERKOPIERER GB DIGITAL LASER COPIER CLASS 1 LASER PRODUCT LASER KLASSE 1 LUKOAN 1 LASERLAITE KLASS 1 LASERAPPARAT VAROITUS!LAITTEEN KÄYTTÄMINEN MUULLA KUIN TÄSSÄ KÄYTTÖOHJEESSA MAINITULLA TAVALLA SAATTAA ALTISTAA KÄYTTÄJÄN TURVALLISUUSLUOKAN 1 YLITTÄVÄLLE NÄKYMÄTTÖMÄLLE LASERSÄTEILYLLE. VARNING OM APPARATEN ANVÄNDS PÅ ANNAT SÄTT ÄN I DENNA BRUKSANVISNING SPECIFICERATS, KAN ANVÄNDAREN UTSÄTTAS FÖR OSYNLIG LASERSTRÅLNING, SOM ÖVERSKRIDER GRÄNSEN FÖR LASERKLASS 1. Laserstrahl LASERSTRÅLING CAUTION INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. ADVERSEL USYNLIGEKSPONERING FORNÅR DEKSEL ÅPNES OG SIKKERHEDSLÅS BRYTES. [. . . ] If installed, change the printer port setting. For the change of the printer port setting, see "USING OTHER INSTALLED DRIVERS" (p. 63). 38 Flow of installation Refer to the following table and then begin installation. Operating system Windows XP Windows 98 Interface USB/ Parallel USB Parallel USB Windows Me Parallel USB Windows 2000 Windows 95/ NT 4. 0 Parallel Parallel Reference pages for how to install Installing onto Windows XP (USB/parallel interface) (p. 40) Installing onto Windows 98/Me/2000 (USB interface) (p. 44) Installing onto Windows 95/98/Me/NT4. 0/2000 (Parallel interface) (p. 47) Installing onto Windows 98/Me/2000 (USB interface) (p. 44) Installing onto Windows 95/98/Me/NT4. 0/2000 (Parallel interface) (p. 47) Installing onto Windows 98/Me/2000 (USB interface) (p. 44) Installing onto Windows 95/98/Me/NT4. 0/2000 (Parallel interface) (p. 47) Installing onto Windows 95/98/Me/NT4. 0/2000 (Parallel interface) (p. 47) 7 39 INSTALLING THE SOFTWARE The following term is used in this section. MFP Means the unit as a printer and scanner. · For this description, it is assumed that the mouse is configured for right hand operation. · To print or scan, the MFP must be in the online state. · The scanner feature only works when using a USB interface cable. · If any error message appears, solve the problem following the instructions on the screen. After your problem is solved, the installing procedure will be continued. Depending on your problem, you may have to exit the installer. In this case, click the "Cancel" button to exit the installer. After solving your problem, reinstall the software from the beginning. Installing onto Windows XP (USB/parallel interface) Before starting the installation, make sure the USB or parallel interface cable is not connected to the MFP. 1 2 Insert the supplied CD-ROM into your CD-ROM drive. Click the "start" button, click "My Computer" ( double-click the CD-ROM ( ) icon. ), and then When any of "Found New Hardware Wizard" messages appear during the software installation, be sure to click the "Cancel" button. 3 Double-click the "setup" ( ) icon. If the language selection screen appears after you double click the "setup" icon, select the language you wish to use and click the "Next" button. (Normally, the correct language is selected automatically. ) 4 Select the software packages to be installed, and then click the "Next" button. The software packages with checkmark ( ) on the list on the screen will be installed. Click the "Display README" button to show the information on the selected package. 40 · If you are using the parallel interface connection, do not select the Button Manager checkbox because this feature is not supported with the parallel interface. · If the following screen appears, click the "OK" button. Review the contents in "BEFORE INSTALLATION" (p. 38), and then select only appropriate the software packages to be installed. 5 Review the software packages to be installed on the screen, and then click the "Start" button. The software packages to be installed will be displayed on the screen. If inappropriate packages are displayed, click the "Back" button to select appropriate packages again. 6 Copying files for MFP driver installation and parallel interface setup (This step will start if it was selected in step 4). 1 2 3 4 After confirming the message in the "Welcome" window, click the "Next" button. A dialog box appears asking you to verify that the USB or parallel interface cable is not connected to the MFP. Make sure that the interface cable is not connected and click the "Next" button. Click the "Next" button in the dialog box to install the MFP driver or Cancel to quit the installation. The setup program will start to copy the files. [. . . ] The entire liability of SHARP and/or its Licensors and your exclusive remedy will be replacement of the disk which fails to meet the limited warranty provided by this Clause 6. A disk will be replaced when it is returned to SHARP or a SHARP authorized representative with a copy of the receipt. SHARP will have no responsibility to replace a disk damaged by accident, abuse or misapplication. ANY IMPLIED WARRANTIES ON THE DISKS, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO NINETY (90) DAYS FROM THE DATE OF DELIVERY. [. . . ]