User manual SHARP AR-C250 OPERATION MANUAL

[. . . ] MODEL AR-C250 DIGITAL FULL COLOUR COPYING MACHINE OPERATION MANUAL Digital Do not make copies of anything which is prohibited from copying by law. The following items are nomally prohibited from copying by national law. Other items may be prohibited by local law. q Money q Stamps q Bonds q Stocks q Bank drafts q Checks q Passports q Driver's licenses Warning This is a class A product. [. . . ] As a starting point, the dimensions shown for extra size originals or paper will be the closest match to standard sizes. READY TO COPY. CHAPTER3 OK EXTRA SIZE X Y ORIGINAL SIZE 297 210 CANCEL (139~432) mm (100~297) mm OK SPECIAL FUNCTIONS Image editing functions ENABLE AUTO SIZE DETECTION PAPER SIZE FOR BYPASS READY TO COPY. OK EXTRA SIZE X Y ORIGINAL SIZE 297 210 CANCEL (139~432) mm (100~297) mm OK ENABLE AUTO SIZE DETECTION PAPER SIZE FOR BYPASS READY TO COPY. OK EXTRA SIZE X Y ORIGINAL SIZE 330 110 CANCEL (139~432) mm (100~297) mm 5 Adjust the original size on the "ORIGINAL SIZE" tab and paper size on the "PAPER SIZE FOR BYPASS" tab, respectively. q OK Adjust each X (horizontal) and Y (vertical) dimension using the and keys. If the "ENABLE AUTO SIZE DETECTION" check box is checked on either tab, the size detection function will be activated. In this case, the "X/Y" keys and " / " keys will be grayed out not to allow any input. q ENABLE AUTO SIZE DETECTION PAPER SIZE FOR BYPASS READY TO COPY. OK EXTRA SIZE X Y ORIGINAL SIZE CANCEL (139~432) mm (100~297) mm OK ENABLE AUTO SIZE DETECTION PAPER SIZE FOR BYPASS 3-37 IMAGE EDITING FUNCTIONS I 6 Press the upper "OK" key on the touch panel. OK CANCEL 330 A4 A3 B4 (139~432) mm CHAPTER3 SPECIAL FUNCTIONS Image editing functions OK 7 AUTO IMAGE 100% COPY RATIO Press the "AUTO IMAGE" key on the touch panel. q Refer to page 2-11 for the AUTO IMAGE function. Y-110 SELECT 1 4 7 AUDIT 2 5 8 0 3INTERRUPT 6 INTE 8 Enter the desired number of copies and press either of the COLOUR COPY START ( ) key or BLACK COPY START ( ) key. q CLEAR CLE CA AL ALL The setting screen for EXTRA SIZE will be closed and the initial screen will appear. 9 PROGRAM CC CL P CLEAR 3-38 CHAPTER 4 SUPPLIES This chapter describes the supplies for this copier such as paper and toner. q q q q PAPER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Types and sizes of copy paper . . . . . . . . . . . . . . . . . . . . . . . . . Loading copy paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ADDING TONER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USED TONER DISPOSAL . . . . . . . . . . . . . . . . . . . . . . . . . . . STORAGE OF SUPPLIES . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 4-2 4-2 4-2 4-5 4-8 4-9 CHAPTER4 4-1 PAPER Types and sizes of copy paper Size Paper trays A5 to A3 (5-1/2" x 8-1/2" to 11" x 17") A6 to A3W (5-1/2" x 8-1/2" to 12" x 18") Weight Capacity Special paper (80g/m2(21 lb. ) paper) 60~105g/m2 500 sheets (16 lbs. to 28 lbs. ) 60~200g/m2 50 sheets (16 lbs. to 55 lbs. ) (Ordinary paper) Transparency film, 176g/m2 (65 lb. ) paper, 200g/m2 (110 lb. )paper Bypass tray q For best results, use only paper recommended by SHARP. CHAPTER4 SUPPLIES Paper Loading copy paper "OPEN TRAY AND ADD PAPER. " will be displayed when there is no copy paper in a selected paper feed station. When a selected paper tray is not installed or is improperly installed, "PUSH PAPER TRAY INTO MACHINE UNTIL IT LATCHES. " will be displayed. Install it or push it back firmly into place. For best results, use only Sharp recommended paper. 4-2 PAPER Loading paper in the paper trays 1 Gently lift and pull out the paper tray. CHAPTER4 2 Only use paper within the Sharp specification and follow the paper manufacturer's instructions regarding fanning and loading the paper. SUPPLIES Paper Maximum height line q The tray holds 500 sheets of paper. Do not load paper above the maximum height line. 3 Push the paper tray firmly back into the copier. 4-3 PAPER Changing the copy paper size in the tray 1 Gently lift and pull out the paper tray until it stops. 2 CHAPTER4 SUPPLIES Paper Left guide Maximum height line Front guide Paper size card Adjust the paper size indicator to match the paper size to be set. q Slide the paper size indicator to the right or left to match the paper size. Paper size indicator 3 Adjust the front guide and left guide while squeezing their lock levers. q Slide the front and left guides to match the width and length of the copy paper. 4 Load copy paper into the tray. 5 6 Place the paper size card in the front of the paper tray. q The paper size card has three faces. Fold the card properly to show the selected paper size. The paper size indication which shows through the slot on the front of the copier should match the selected paper size. Push the paper tray firmly back into the copier. 4-4 ADDING TONER The message " TONER SUPPLY IS LOW. " will appear in the message display before the toner supply is completely empty. Y : yellow, M : magenta, C : cyan, BK : black) If copying is continued, copies will gradually become lighter until the copier stops and the message display changes to "ADD TONER. PRESS . " indicating that the toner supply is empty. Toner can be added any time after the message " TONER SUPPLY IS LOW. To add toner, stop the copier and proceed as below. When either message appears, you can use the INFORMATION ( ) key for detailed information as necessary. [. . . ] Contact your authorised Sharp Service Centre for service. Use key operator program "DISABLING OF DOCUMENT FEEDER" (page 8-28) to prevent the use of the optional document feeder. Contact your authorised Sharp Service Centre for service. Contact your authorised Sharp Service Centre for service. SORTER IS OUT OF SERVICE. [. . . ]