User manual SHARP AR-C260M

[. . . ] MODEL AR-C260 AR-C260M DIGITAL FULL COLOUR COPIER/PRINTER (AR-C260) DIGITAL FULL COLOUR MULTIFUNCTIONAL SYSTEM (AR-C260M) OPERATION MANUAL (for general information and copier operation) Page BEFORE USING THE PRODUCT MANAGING THE MACHINE PERIPHERAL DEVICES BEFORE MAKING COPIES BASIC PROCEDURE FOR MAKING COPIES 1-1 2-1 3-1 4-1 5-1 CONVENIENT COPY FUNCTIONS 6-1 MACHINE MAINTENANCE (FOR COPYING) 7-1 SPECIFICATIONS 8-1 Be sure to become thoroughly familiar with this manual to gain the maximum benefit from the product. Before installing this product, be sure to read the installation requirements and cautions sections. Be sure to keep all operation manuals handy for reference including this manual, the "Operation manual for general information and copier operation" and operation manuals for any optional equipment which has been installed. In some areas, the "POWER" switch positions are marked "I" and " " on the copier instead of "ON" and "OFF". The symbol " " denotes the copier is not completely de-energized but in a stand-by condition at this "POWER" switch position. [. . . ] To close the paper selection screen without making a selection, touch the [PAPER SELECT] key. Original scale Centring scale A4 R or 8x11 R A5 or 5x8 2 Ensure that the 1-sided to 1-sided copy mode is selected. ORIGINAL PLAIN B5 A4 DUPLEX A4 A4 A3 The one-sided to onesided mode is selected when no icon for a twosided mode appears in the dashed area on the display. 5-7 NORMAL COPYING 4 Select the desired output mode. (See page 5-5. ) When a document is detected on the 2-SIDED COPY document glass, the group mode will be automatically selected. OUTPUT To select sort copy, touch the [OUTPUT] key, then touch the [SORT] key on the displayed screen, and then touch the [OK] key. NOTE If the [SORT] or [GROUP] key is touched, its corresponding icon will appear on the touch panel. To clear the icon display, press the [CA] (clear all) key. Note that all selections made to that point will be cancelled. 6 Press the [COLOUR COPY( START ( or [BLACK COPY START )] key. )] Replace the original with the next original and press the [START] key. Repeat this operation until all originals have been scanned. 7 Touch the [READ-END] key. PLACE NEXT ORIGINAL. READ-END numeric 5 Use the of copies. keys to set the desired number Up to 999 can be set. If you are only making a single copy, the copy can be made with the copy number display showing "0". Use the [C] (clear) key to cancel an entry if a mistake has been made. NOTE If colour copies are made with the output set to "Sort", only one set of copies will be made even if a selection is made for a greater number of copies. (See page 5-5 "Copy output (sort and group)") When "Group" is selected, the selected number of copies will be made (See page 5-4 "Copy mode output restrictions"). If you selected "Sort" for the output in step 4 and pressed the [BLACK COPY START] key in step 6, it is necessary to touch the [READ-END] key. 5-8 NORMAL COPYING Automatic two-sided copying from the document glass When a duplex module/2 x 500 sheet paper drawer and a duplex bypass/inverter unit are installed, the following automatic two-sided copy function is possible. The copy paper is turned over automatically, allowing easy two-sided copying. NOTE Certain restrictions exist depending on the amount of memory installed and the copy settings. (See "Copy mode output restrictions" and "Specifications for memory capacity and maximum number of originals" on page 5-4. ). Original Copy an 1 Place 4-6)original on the document glass. (page 4 Touch the [OK] key. OK BINDING CHANGE 2 Touch the [2-SIDED COPY] key. 2-SIDED COPY 5 OUTPUT Make selections and proceed as in steps 3 to 7 on pages 5-7 and 5-8. 3 Touch the [1-sided to 2-sided copy] key. Example of a portrait-oriented original Example of a landscape-oriented original When making automatic two-sided copies of a one-sided A3 (11" x 17") or B4 (8-1/2" x 14") size portrait original, or when the front and back side of a two-sided original are copied backwards, touch the [BINDING CHANGE] key. 5-9 EXPOSURE ADJUSTMENTS This copier has eight exposure modes to choose from: AUTO, TEXT/PRTD. , PHOTO, TEXT/PHOTO, TEXT, PHOTO, PRINTED PHOTO and MAP. [AUTO] This is the standard initial setting for this copier. In this mode, the characteristics of an original being copied are "read" by the exposure system, and exposure adjustments are made automatically. [TEXT/PRTD. , PHOTO, TEXT/PHOTO, TEXT, PHOTO, PRINTED PHOTO and MAP. ] The exposure can be manually adjusted in 9 steps. 1 Touch the [EXPOSURE] key. INTERRUPT AUTO EXPOSURE AUTO A4 PAPER SELECT 100% 0 A4 N NOTES Selecting the resolution Six resolution settings are available for both colour copying and black and white copying, depending on the contents of the original. Original type Contents of the original Black and white copying : This is the standard initial setting for this copier. In this mode, the characteristics of an original being copied are "read" by the exposure system, and exposure adjustments are AUTO made automatically. This optimizes the contrast of the copied images. [. . . ] 1-2 Standard supplies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-17 Staple cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Staple cartridge replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-7 Staple jam removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ]