User manual SHARP AR-FR22U

[. . . ] This manual contains very important information. Please keep the manual in a safe place where it will not be lost. Please keep the manual in a safe place where it will not be lost. This Class B digital apparatus complies with Canadian ICES-003. [. . . ] This program is used to clear all data (printer user names, fax/image send destinations, received fax sender information) that appears in the JOBS COMPLETED list in the job status screen (page 1-15 of the "OPERATION MANUAL (for general information and copier operation)"). To clear the data, touch the [CLEAR ALL DATA IN JOB STATUS JOBS COMPLETED LIST] key. A message asking you to confirm the clear ("YES" or "NO") will appear. Touch the [YES] key to begin clearing the selected data. during clearing , progress will be shown as a percentage. When data clearing is finished, the power of the machine will turn off temporarily and then turn on again automatically. This program is used to clear the items indicated below, which cannot be cleared or initialized using the "CLEAR ALL MEMORY" program (page 6) or "RESTORE FACTORY DEFAULTS" (page 13 of the "KEY OPERATOR'S GUIDE") program. g INDIVIDUAL/GROUP/PROGRAM/RELAY BROADCAST MEMORY BOX*1 2 G SENDER CONTROL LIST* G POLLING MEMORY/CONFIDENTIAL MEMORY BOX*3 G SENDER DATA*1 G ALLOW/REJECT RECEPTION SETTING DATA (INCLUDING POLLING PASSCODE NUMBER)*3 *1. Can only be selected when the fax or network scanner function is enabled. Can only be selected when the network scanner function is enabled. Can only be selected when the fax function is enabled. Touch the or key to move between the screens. ) To clear the data, touch the [CLEAR] key. A message asking you to confirm the clear ("YES" or "NO") will appear. Touch the [YES] key to begin clearing the selected data. during clearing , progress will be shown as a percentage. When data clearing is finished, the power of the machine will turn off temporarily and then turn on again automatically. This program is used to enhance the security function. The number of times data clearing is repeated when "CLEAR ALL MEMORY", "CLEAR ALL DATA IN JOB STATUS JOBS COMPLETED LIST", or "CLEAR ADDRESS BOOK DATA/IMAGE SEND REGISTERED DATA" is executed can be set to any number from 1 to 7. Touch the [NUMBER OF TIMES DATA CLEAR IS REPEATED] key, and set the desired number of times with the or key. (See "About the repeat setting" on page 8 of this manual. This program is used to automatically clear all data in the machine when the power switch is turned on. [. . . ] This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. The CE mark logo label is affixed on an equipment in case that the directives described in the above sentence are applicable to the product. (This sentence is not applicable in any country where the above directives are not required. This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. [. . . ]