User manual SHARP AR-NC5J NC5J OPERATORS MANUAL. CHAPTER 2, ABOUT THE PRINT SERVER CARD.

[. . . ] 2-8 What We Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-11 Hardware Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-12 Software Specification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] In order to use this function with Print Server Card, a RAPP server must exist within the same subnetwork and be properly setup. The value must be configured in the format of four part series of numbers separated by decimal points, such as "xxx. xxx. xxx. xxx". The value must be configured in the format of four part series of numbers separated by decimal points, such as "xxx. xxx. xxx. xxx". If you set as 0. 0. 0. 0, this section will be invalid and subnet mask will be set according to the IP address class. The value must be configured in the format of four part series of numbers separated by decimal points, such as "xxx. xxx. xxx. xxx". Gateway must reside within the same subnetwork as Print Server Card. If you set as 0. 0. 0. 0, this section will be invalid. Set to print banner page when using FTP/LPR printing. RARP RARP Use RARP ENABLE IP Address IP Address IP Address 0. 0. 0. 0 Subnet Mask Subnet Mask Subnet Mask 0. 0. 0. 0 Default Gateway Default Gateway Default Gateway 0. 0. 0. 0 Use FTP/LPD Banner Use FTP/LPD Banner Use FTP/LPD Banner NO About Print Server Card 2-8 Print Server Card Users Manual NetWare Telnet NetWare Protocol Name Web page NetWare Protocol NICManager Use NetWare Protocol Frame Type Factory Default ENABLE Explanation Enable or disable NetWare protocol. This will influence the ability to use print server, remote printer and Setup Utility (for IPX/SPX). Setup default frame type used by Print Server Card. When Print Server Card can not operate with the frame type set up, it will automatically change to different frame type. Setup operation mode(print server/remote printer) for Print Server Card. When Print Server Card can not operate with the operation mode set up, it will automatically change to different operation mode. Setup "Printer" name which will be registered to NetWare server. This name must be same as the "Printer" name registered to NetWare server. Setup print server name when Print Server Card is working in print server mode. This name will be used to identify the printer within the network when using NetWare protocol. The name will be used as login name when logging into the NetWare server. Set the password for Print Server Card to log in to the file server. If you set password for Print Server Card, you must set the same password on file server (You can set the password on file server in PCONSOLE). When you want Print Server Card to connect to several file server, all the passwords must be the same. *Note: Print Server Card has default password of null. [. . . ] Add a default or existing workgroup name. If you add a workgroup name that does not exist, it will not be indicated as workgroup. Add an explanation for Print Server Card. The explanation here will be shown as a comment in Windows Explorer. Use NetBEUI Protocol ENABLE SCxxxxxx (xxxxxx is last six number of Ethernet address. ) "Sharp-Printer" Workgroup Workgroup Workgroup Comment Comment Comment "Sharp AR-NC5J" About Print Server Card 2-10 Print Server Card Users Manual What We Support Below is information on Print Server Card's function. Function Automatic IP address configuration with DHCP, BOOTP, RARP DHCP/BOOTP The Print Server Card is equipped with DHCP/BOOTP protocol. [. . . ]