User manual SHARP AR-P19 OPERATION MANUAL

[. . . ] OPERATION MANUAL (for printer) DIGITAL LASER COPIER/PRINTER DIGITAL MULTIFUNCTIONAL SYSTEM Be sure to become thoroughly familiar with this manual to gain the maximum benefit from the product. Before installing this product, be sure to read the installation requirements and cautions sections of the "Operation manual (for general information and copier operation)". Be sure to keep all operation manuals handy for reference including this manual, the "Operation manual (for general information and copier operation)" and operation manuals for any optional equipment which has been installed. Warranty While every effort has been made to make this document as accurate and helpful as possible, SHARP Corporation makes no warranty of any kind with regard to its content. All information included herein is subject to change without notice. [. . . ] If not selected, your Windows login name will be automatically used. Default setting: Not selected [Job Name] Use this to set the default job name that appears in the operation panel of the machine. Note that if [Always Use This Job Name] is not selected, the file name selected in the application will be automatically used. The name that appears in [Job ID] in the [Job Control] window (which appears when printing is executed) will appear in the operation panel of the machine. Up to 30 characters can be entered for the name. [Always Use This Job Name] Select this checkbox to have the [Job Name] entered in this window appear in the operation panel of the machine. If not selected, the file name selected in the application will be automatically used. Default setting: Not selected 5 2-14 SELECTING PRINTING FUNCTIONS Settings in the [Watermarks] tab The following window appears when the [Watermarks] tab is clicked. The settings and buttons are explained below. 1 Watermark preview The watermark function is used to print a watermark (a faint, shadowlike text image) on the paper. This shows a preview of the currently selected watermark. The position of the watermark can be adjusted by directly dragging the image with your mouse, or by using the scrollbars at the right and bottom of the preview screen. Default setting: x: 0, y: 0 [Update] Click this button to adjust the size or angle of the text of a stored watermark. [Delete] Click this button to delete a stored watermark. 5 NOTE The image that appears in the Watermark Preview is an approximate representation of what will appear in the print. [Center] Select this setting to have the watermark printed in the centre of the paper. 2 Text When you wish to create a custom watermark, enter the text of the watermark here. To store the entered text as a watermark, click the [Add] button explained in 4 above. Grey Scale Use this setting to adjust the colour of the font of the currently selected watermark. Any value from 0 to 255 points can be selected. Default setting: 192 points Edit Fonts Use this setting to select the font of the currently selected watermark. Transparent Text Select this checkbox when you wish to have the characters of the watermark printed faintly in the background of the text. Default setting: Selected On First Page Only Select this checkbox when you want to have a watermark printed on only the first page of a print job. Default setting: Not selected As Outline Only Select this checkbox when you want to print only the outline of the characters of a watermark. Default setting: Not selected This setting cannot be selected when setting 8 is selected. 6 7 Size Use this setting to adjust the size of the characters of the currently selected watermark. [. . . ] Enter the password in "Folder Pass Code" in the document filing screen. (page 2-12) 6-3 TROUBLESHOOTING Checking the IP address There are three ways to check the IP address: 1. Using [LIST PRINT] in [CUSTOM SETTINGS] in the operation panel Select NIC PAGE to print a list of the machine settings. The IP address that has been set for the machine can be found in this list. [. . . ]