User manual SHARP AR-PF1 LISTS BARCODES THAT ARE SUPPORTED IN THIS FLASH ROM OPTION

[. . . ] SHARP is not responsible for any loss or damages, direct or indirect, arising from or related to the use of this operation manual. © Copyright SHARP Corporation 2001. Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under copyright laws. Trademark Acknowledgments Microsoft Windows, MS-DOS, and Windows NT are trademarks of Microsoft Corporation in the U. S. A. Macintosh, Power Macintosh, Mac OS, LaserWriter, and AppleTalk are registered trademarks of Apple Computer, Inc. [. . . ] The currently set numerical value is displayed. Numerical values can be set by touching the [ ] and [ ] keys. 3-3 MAKING CONFIGURATION SETTING Default settings The default settings allow detailed print conditions to be set for printing without any printer driver (for example, printing from MS-DOS and printing from a computer without any printer driver installed). NOTE When some items can be set both in the printer driver and on the operation panel, the values set in the printer driver override those set on the operation panel. For items that can be set in the printer driver, perform setting in the printer driver. s Smoothing SMOOTHING reduces jaggies seen at roundish curved portions of characters and images to be printed and improves pseudo resolution. Default setting: On Smoothing on or off can be selected. s Default paper type The paper type to be used for printing in the normal conditions is set. Printing will be performed onto the specified type paper unless otherwise specified. Default setting: PLAIN Plain paper, pre-printed paper, recycled paper, transparency film letter head paper, pre-punched paper or color paper can be set. s Copies COPIES is set when the number of copies to be printed is set. Default setting: 1 The number of copies can be set from 1 to 999. s Default output tray The output tray to be used for printing in the normal conditions is set. Printed sheets will be output to the specified tray unless otherwise specified by application software. Default setting: Depends on installation of peripheral devices. The trays that can be selected depend on installation of peripheral devices. q Auto tray switching . . . . . . . . . . . . . . . . . . . . . . . . . . Used to switch automatically the paper tray of the same paper size when paper runs out in continuous printing. For the items below, detailed setting procedure is described in the facsimile operation manual. q Address control*3 . . . . . . . . . . . . . . . . . . . . . . . . Used to register destination E-mail addresses, fax numbers, and Internet fax addresses. Also group entry, memory box entry, custom index entry, and scanner sender entry can be set. 2 q Receive mode* . . . . . . . . . . . . . . . . . . . . . . . . . . The fax receive mode (automatic or manual) is set. q Fax data forward*2 . . . . . . . . . . . . . . . . . . . . . . . Received fax data in memory can be forwarded to another destination. q Key operator programs . . . . . . . . . . . . . . . . . . . . [. . . ] {Enable TCP/IP} Same as for the main unit. Enable NetWare When using this product in a network that uses the NetWare protocol, set this program. {Enable NetWare} Same as for the main unit. Enable EtherTalk When using this product in a network that uses the EtherTalk protocol, set this program. [. . . ]