User manual SHARP AY-XP07ER

[. . . ] Please read this manual carefully before operating the product. Do not pull or deform the power supply cord. Pulling and misuse of the power supply cord can result in damage to the unit and cause electrical shock. Be careful not to expose your body directly to the outlet air for a long time. [. . . ] Do not adjust the horizontal adjustment louvre extremely to the right or left when operating the air conditioner with fan speed "SOFT" for an extended period of time. Press the Progressive Air Flow button during cooling or dry operation when you do not want to feel cold air. Vertical adjustment louver is set downward to deliver the warm air down to the floor and warm you. The Progressive Airflow setting is cancelled when you press Full Power button while Progressive Airflow is set. ⷠIf you want Progressive Airflow operation in Full Power mode, press PROGRESSIVE AIRFLOW button during Full Power operation. In this operation, the air conditioner works at maximum power to makes the room cool or warm so rapidly that you can use it just after you come home. FULL POWER operation will also be cancelled when the operation mode is changed, or when the unit is turned off. ) on the unit will · The green FULL POWER lamp ( turn off. You can not set the temperature and fan speed during the FULL POWER operation. When the ONE-HOUR OFF TIMER is set, the unit will stop operating after one hour. The orange TIMER lamp ( ) on the unit will light up. ⷠThe unit will stop operating after one hour. Or, turn the unit off by pressing the ON/OFF button. ⷠThe red OPERATION lamp ( ) and the orange TIMER lamp ( ) on the unit will turn off. When the ONE-HOUR OFF TIMER is set while the unit is not operating, the unit will operate for an hour with the formerly set condition. ⷠIf you wish to operate the unit for another hour before the ONE-HOUR OFF TIMER activates, press the ONE-HOUR OFF TIMER button again during operation. ⷠIf TIMER ON and/or TIMER OFF are set, TIMER CANCEL button cancels every setting. 1 Press the SELF CLEAN button when the unit is not operating. The red OPERATION lamp ( ) , the green SELF CLEAN lamp ( ) and the blue PLASMACLUSTER lamp on the unit will light up. ⷠThe unit will stop operation after forty minutes. Or, turn the unit off by pressing the ON/OFF button. ⷠThe red OPERATION lamp ( ), the green SELF CLEAN lamp ( ) and the blue PLASMACLUSTER lamp on the unit will turn off. [. . . ] The following conditions do not denote equipment malfunctions UNIT DOES NOT OPERATE The unit will not operate if it is turned on immediately after it is turned off. The unit will not operate immediately after the mode is changed. This is to protect the internal mechanisms. Wait 3 minutes before operating the unit. [. . . ]