User manual SHARP BD-HP17U

[. . . ] WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY. ENGLISH Power Cord Protection To avoid any malfunctions of the Player, and to protect against electric shock, fire or personal injury, please observe the following. · Hold the plug firmly when connecting or disconnecting the AC power cord. · Keep the AC power cord away from heating appliances. · Never put any heavy object on the AC power cord. [. . . ] You cannot turn the Player on until the a (STANDBY) indicator stops blinking. 21 Before Starting Playback Setting the Remote Control Code · 3 types of remote control codes operate this Player: RC-1, RC-2 and RC-3. If you operate this Player by remote control along with another SHARP Blu-ray Disc Player or DVD Player placed next to it simultaneously, switching the remote control code (both the Player and remote control) to one of the signals (RC-1, RC-2 or RC-3) will let you operate only with this Player. · Make sure to set the Player and remote control to the same remote code. You can not operate the Player if they are not set to the same code. Operating the TV of SHARP Using the Remote Control The Universal Remote Control may operate the basic functions of the TV of SHARP. TV function control · · · · TV Power: B TV Channel up/down: P r / s TV Volume up/down: i e/f TV-AV Selector: b Setting the Remote Control Code of the Remote Example: Setting the code to "RC-3". 1 2 Press and hold 3 first and then B on the remote control together for more than 5 seconds. Press B to turn off the player. B (POWER) Setting the Remote Control Code of the Player 3 Point the remote control at the player, then press and hold the DISPLAY button. Remote control sensor The display on the player changes as shown below, and the player will be set to the same number as the remote control. Example: Change "RC-1" to "RC-3". Approx. later If remote control does not work Firstly, press B to turn on this player. Press B on the remote control and check the front panel display (RC-1, RC-2 or RC-3). Set the remote control code according to the display and press B to see if you can turn on/off the Player. 22 Before Starting Playback Turning the Power On Turning the power on Press B on the remote control or on the Player to turn on the power of the Player. Language Setting Changing the on-screen display language 1 Press SETUP to display the SETUP MENU screen. Entering standby Press B on the remote control or on the Player to enter standby. 2 Press a/b/c/d to select "ON SCREEN LANGUAGE", then press ENTER. · If you press B again immediately after entering standby, the Player may not turn on. If this happens, wait for 10 seconds or more and then turn on the power again. B (POWER) DISPLAYS THE TITLE LIST SETTINGS ON SCREEN LANGUAGE 3 DVD/CD mode indicator I (ON) indicator BD mode indicator Press a/b/c/d to select the language you want to display on the screen, then press ENTER. DEUTSCH ENGLISH ITALIANO NEDERLANDS a (STANDBY) indicator ESPAÑOL PORTUGUÊS SVENSKA Disc Playback Indicators on the Player I (ON) indicator Green on Power on FRANÇAIS a (STANDBY) indicator Red blinks Red on Preparing for standby Standby 4 Press SETUP or EXIT to exit. BD and DVD/CD mode indicators Off Blue on White on White blinks No disc Playing back Disc stopped Loading a disc NOTE · To select the DVD disc language, such as subtitle language, etc. , see page 26. · When you turn on the POWER, the MENU screen automatically displays for a while. Press EXIT to erase the display. 23 Before Starting Playback Turning Off the LCD Backlight and Indications If you feel that the indicators on the Player are too bright when watching movies, you can turn them off except for the I (ON) indicator. Using AQUOS LINK Controlling the Blu-ray disc player using AQUOS LINK What is AQUOS LINK?· A top menu is not displayed for a DVD-RW/R (Video mode) if it has not been finalised. Top menu · With some BD/DVD discs, the top menu may be referred to as the "Title Menu". Use TOP MENU on the remote control when the instructions refer to "Title Menu". · If no top menu is available, the TOP MENU button will have no effect. 4 Press SETUP or EXIT to exit. 26 BD/DVD/CD Playback BD-R/-RE/DVD-R/-RW Playback BD-R BD-RE DVD-R DVD-RW You can play back a recorded disc (finalised disc only). Playback from the beginning 1 2 1 2 Load a disc recorded in Video mode. Press dPLAY. · Playback begins from title 1. Playback by selecting a title Load a disc recorded in Video mode. Press TOP MENU. · The TITLE LIST screen is displayed. · The TITLE LIST screen also can be displayed by pressing ENTER after choosing "DISPLAYS THE TITLE LIST" in SETUP MENU. DISPLAYS THE TITLE LIST SETTINGS ON SCREEN LANGUAGE · When more than seven titles are displayed, switch pages by pressing KSKIP or LSKIP. MENU [TITLE LIST (DVD: ORIGINAL)] 21/5 FRI 9:30 AM [FROM OLD] 1 PROGRAM 1 2 PROGRAM 2 3 PROGRAM 3 4 PROGRAM 4 PROGRAM 1 110 MIN. THU 40 MIN. Information of selected title Disc Playback Title Name Recording Date Recording Duration B SORTING C PLAYLIST D FUNCTIONS Caption for Colour Button 3 4 Press a/b to select the title, then press ENTER. · Playback of the selected title will begin. You can playback by pressing d PLAY instead of pressing ENTER. Press H STOP to stop playback. NOTE · "Finalise" in this manual refers to making sure to have a recording device process the recorded disc so that it will play in other DVD players and on this player. Accordingly, only finalised discs will playback in this player. 27 BD/DVD/CD Playback Playback by selecting a PLAY LIST Playing back the title you stopped while being played. 1 2 3 MENU Load a disc recorded in Video mode. Press TOP MENU. · The TITLE LIST screen is displayed. 1 MENU Press D (Blue) while the TITLE LIST screen is displayed. [TITLE LIST (DVD: ORIGINAL)] Press C (Yellow), then press ENTER. · The PLAY LIST screen is displayed. [TITLE LIST (DVD: PLAYLIST)] 21/5 PLAYBACK FRI 9:30 AM PROGRAM 1 110 MIN. FROM BEGINNING 21/5 FRI 9:30 AM PROGRAM 1 110 MIN. [. . . ] The HDMI connection carries standard to high definition video signals and multi-channel audio signals to AV components such as HDMI equipped TVs, in digital form without degradation. Disc menu (page 26) This lets you select things like the subtitle language or audio format using a menu stored on the DVD video disc. Dolby Digital A sound system developed by Dolby Laboratories Inc. that gives movie theatre ambience to audio output when the product is connected to a Dolby Digital processor or amplifier. Interlace format Interlace format shows every other line of an image as a single "field" and is the standard method for displaying images on television. The even numbered field shows the even numbered lines of an image, and the odd numbered field shows the odd numbered lines of an image. Dolby Digital Plus A sound system developed as an extension to Dolby Digital, this audio coding technology supports 5. 1 multi-channel surround sound. Letter Box (LB 4:3) (page 34) A screen size with black bars on the top and bottom of the image to allow viewing of wide-screen (16:9) material on a connected 4:3 TV. Dolby TrueHD Dolby TrueHD is a lossless coding technology that supports up to 8 channels of multi-channel surround sound for the next generation optical discs. The reproduced sound is true to the original source bit-for-bit. 50 Glossary Linear PCM Sound Linear PCM is a signal recording format used for Audio CDs and on some DVD and Blu-ray discs. [. . . ]