User manual SHARP BD-HP20S

[. . . ] DEUTSCH BD-HP20S BLU-RAY-DISK PLAYER BLU-RAY DISC PLAYER BEDIENUNGSANLEITUNG OPERATION MANUAL ENGLISH OPERATION MANUAL SAFETY INFORMATION Note: This Player can be used only where the power supply is AC 220-240 V, 50 Hz. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. AS THE LASER BEAM USED IN THIS PLAYER IS HARMFUL TO THE EYES, DO NOT ATTEMPT TO DISASSEMBLE THE CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY. [. . . ] Set the remote control code according to the display and press B to see if you can turn on/off the Player. 22 Before Starting Playback Turning the Power On Turning the power on Press B on the remote control or on the Player to turn on the power of the Player. Language Setting Changing the on-screen display language 1 Press SETUP to display the SETUP MENU screen. Entering standby Press B on the remote control or on the Player to enter standby. 2 Press a/b/c/d to select "ON SCREEN LANGUAGE", then press ENTER. · If you press B again immediately after entering standby, the Player may not turn on. If this happens, wait for 10 seconds or more and then turn on the power again. B (POWER) DISPLAYS THE TITLE LIST SETTINGS ON SCREEN LANGUAGE 3 DVD/CD mode indicator I (ON) indicator BD mode indicator Press a/b/c/d to select the language you want to display on the screen, then press ENTER. DEUTSCH ENGLISH ITALIANO NEDERLANDS a (STANDBY) indicator ESPAÑOL PORTUGUÊS SVENSKA Disc Playback Indicators on the Player I (ON) indicator Green on Power on FRANÇAIS a (STANDBY) indicator Red blinks Red on Preparing for standby Standby 4 Press SETUP or EXIT to exit. BD and DVD/CD mode indicators Off Blue on White on White blinks No disc Playing back Disc stopped Loading a disc NOTE · To select the DVD disc language, such as subtitle language, etc. , see page 26. · When you turn on the POWER, the MENU screen automatically displays for a while. Press EXIT to erase the display. 23 Before Starting Playback Turning Off the LCD Backlight and Indications If you feel that the indicators on the Player are too bright when watching movies, you can turn them off except for the I (ON) indicator. Using AQUOS LINK Controlling the Blu-ray disc player using AQUOS LINK What is AQUOS LINK?Using the HDMI CEC (Consumer Electronics Control), with AQUOS LINK you can interactively operate this player. What you can do with AQUOS LINK When you connect this player to the LCD TV compatible with AQUOS LINK using an HDMI cable, you can perform the function listed below. (See page 15 for connecting to the HDMI terminal) Playback function turns on the LCD TV immediately. When you start to playback of this player, Power of LCD TV will be turned on and the playback image will appear on the screen. Automatic input select function When you start playback of this player, the input selector of the LCD TV will automatically switch to the LCD TV input terminal connected to the player and the playback image will appear on the screen, even if you are watching a TV program. Automatic power off function If you turn off the LCD TV when this player is in stop mode, the power of this player will be turned off automatically. (In this case, while playing back the disc, the power does not turn off. ) Automatic power on function When you switch to the LCD TV input terminal connected to this player, the power of the player will be turned on automatically. NOTE · In order to make AQUOS LINK available, set up AQUOS LINK on the LCD TV that is connected to this player. See page 42 regarding the setup of this player. Refer to the Operation Manual of the TV for details regarding setup. Quick operation Press LIGHT to turn the LCD backlight on or off. SETUP MENU operation 1 2 3 MENU Press SETUP to display the SETUP MENU screen. Press a/b/c/d to select "SETTINGS", then press ENTER. Press a/b to select "FRONT DISPLAY/LED", then press ENTER. [FRONT DISPLAY / LED] AUDIO VIDEO SETTINGS SPEAKER SETTINGS QUICK START AUTO POWER OFF AQUOS LINK PLAYBACK SETTING FRONT DISPLAY / LED VERSION SOFTWARE UPDATE SYSTEM RESET 4 5 Press c/d to select "ON" or "OFF", then press ENTER. Press SETUP or EXIT to exit. 24 BD/DVD/CD Playback This section explains playback of commercially available BD Video and DVD Video discs (like movies), CDs, and recorded DVD-RW/R discs. BD/DVD Video Playback BD VIDEO DVD VIDEO Loading a Disc 1 2 Load a disc. · Playback may begin automatically, depending on the disc. 1 2 Press B to turn on the power. Press OPEN/CLOSE to open the disc tray. B (POWER) OPEN/CLOSE Press dPLAY. · Playback begins from the first title. · The menu may be displayed first, depending on the disc. Perform playback operation by following the directions on the screen. 3 To stop playback Load a disc on the disc tray. Press H STOP. Resume playback function · Insert the disc with the label face up. · In case of disc recorded on both sides, face down the side to play back. · If you press dPLAY next, playback will resume from the point where the Player was previously stopped. To playback from the beginning, cancel resume mode by pressing HSTOP, then press dPLAY. [. . . ] The sound on Audio CDs is recorded at 44. 1 kHz with 16 bits. (Sound is recorded between 48 kHz with 16 bits and 96 kHz with 24 bits on DVD video discs and between 48 kHz with 16 bits and 192 kHz with 24 bits on BD video discs. ) Resume playback (page 25) If you stop playback while it is in progress, the Player stores the stop position in memory, and this function lets you playback from that point. Skip (page 29) This returns to the start of the chapter (or track) being played, or skips to the next chapter (or track). MPEG-2 MPEG-2 (Moving Picture Experts Group phase 2) is one of the video data compression schemes, which is adopted for DVD videos and digital broadcasts worldwide. Some Blu-ray Discs also use high bitrate MPEG-2. Subtitles (pages 30, 32, 33) These are the lines of text appearing at the bottom of the screen which translate or transcribe the dialogue. They are recorded on many DVD and BD video discs. Multi Angle (pages 31, 32) This is a feature of DVD and BD video discs. [. . . ]