User manual SHARP CD-80W

[. . . ] MINI COMPONENT SYSTEM MODEL CD-80W OPERATION MANUAL CD-80W mini component system consisting of C D -8 0 W (m a i n u n it ) , C P- 8 0 ( f ro n t s p e a k e r ) a n d GBOXS0041AWM1 (surround speaker). ENGLISH ENGLISH INTRODUCTION Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. CONTENTS Page ACCESSORIES . 24 ACCESSORIES Parts and accessories mentioned in this operation manual other than those in the drawing are not included. FM aerial × 1 AM loop aerial × 1 AC power lead × 1 Remote control × 1 "AA" size battery (UM/SUM-3, R6, HP-7 or similar) × 2 E-1 SPECIAL NOTES q When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. [. . . ] VOCAL: Vocals (midrange tones) are emphasised. E-12 COMPACT DISC OPERATION 4 5 s CD playback 12 cm (5") 8 cm (3") 1 2 3 4 Press the ON/STAND-BY button to turn the power on. Press the OPEN/CLOSE button to open the disc tray. Place the CD(s) on the disc tray, label side up. q CDs can be placed on any open position on the disc tray. q Be sure to place 8 cm (3") CD(s) in the middle of the disc trays. 1 2 3, 6 5, 7 8 5, 7 2 1 Caution: Do not stack CDs in the tray. This can damage the player and the CDs. 5 6 7 8 When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position. Press the OPEN/CLOSE button to close the disc tray. q The total number of tracks and the total playing time for one disc will be displayed. At this time, the disc number indicator is flashing. Press the DISC SKIP button to select the desired disc number. Press the 0 (0R) button. 8 q Playback will begin from track 1 on the disc you have selected to play. q After the disc finishes playing, the next disc will automatically play. q When there is no CD in one of the disc 1 - 3 positions, that position will be skipped and the next CD will be played. q When the last track on the third disc has finished playing, the unit will stop automatically. Caution: q Do not carry the unit with discs left in the disc trays. The discs may come loose inside the unit and they may be damaged or cause damage to the unit. q Do not place two CDs in one disc position. q Do not push the disc tray whilst it is moving. q Do not attempt to turn the disc tray by hand. q If the power fails whilst the tray is open, wait until the power is restored. q If the disc tray is stopped forcibly, "ERR" will appear in the display and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the stand-by mode and then turn the power on again. q If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. q If a disc is damaged, dirty, or loaded upside down, the disc will be skipped and the next disc will automatically play. To interrupt playback: q "6" will appear. xPress the 6 button on the remote control. the 0R button to resume playback from the same To stop playback: Press the s button. To remove the CDs: Whilst in the stop mode, press the OPEN/CLOSE button. [. . . ] When the recording tape reaches its end, the timer recording will end, and the unit will enter the stand-by mode. To cancel timer operation: Press the ON/STAND-BY button to turn the power on. To change the programmed contents: Start again from step 1. 5 Note: q Once the time is set, the setting will be retained until a new time is entered. E-21 (Continued) (Main unit operation) s Sleep operation MEMORY/ SET The radio, compact disc and cassette deck can all be turned off automatically. TIMER/ SLEEP 1 2 Play back the desired sound source. Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed. To change the sleep time: Whilst the sleep time is displayed, press the TUNING/TIME (X or button to adjust the time. (Maximum: 3 hours - Minimum: 1 minute) The amount of sleep time can also be changed during the sleep operation. q 3 hours - 5 minutes 5-minute intervals q 5 minutes - 1 minute 1-minute intervals W) TUNING/ TIME ( ) 2 3 4 Press the MEMORY/SET button. [. . . ]