User manual SHARP CD-BA3100

[. . . ] Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. [. . . ] Q When the end of the last track is reached during fast forward, "DISC END" will When the beginning of the first track is reached during fast reverse, the disc will start playback automatically. 3 / 5 button repeatedly until the desired track number appears. You can play a disc by specifying the disc number. By pressing the 0/R (0 R) button after one of the s 1 - s 6 buttons is pressed, repeat play will be performed on that disc. Only the chosen disc will be played and stopped automatically. Note: Among discs 1 - 6, those with whitely illuminated CD indicators in the frame can be played. However, if the button of the disc tray with no disc is pressed, playback will not start and the indicator in the frame will go out. The tracks on the disc(s) can be played in random order automatically. By pressing the RANDOM button after one of the s 1 - s 6 buttons is pressed, random play will be performed on that disc. Q If you press the 2 / 4 button during random play, you can move to the track selected next by the random operation. On the other hand, the 3 / 5 button does not allow you to move to the previous track. The beginning of the track being played will be located. Q In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks. After performing repeat or random play, be sure to press the s (CD s) button. Otherwise, the disc(s) will play continuously. Press the MEMORY/SET (MEMORY) button to save the track number. During programme play, buttons s 1 - s 6 will not work. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. Whilst in the stop mode, press the MEMORY/SET (MEMORY) button to enter the programming save mode. The new tracks will be stored after the last track of the original programme. To check which tracks are programmed: Whilst the unit is stopped in the programmed play mode, press the 3 / 5 or 2 / 4 button. [. . . ] In order to ensure proper operation of the CD player, preventative maintenance (cleaning of the laser pickup lens) should be performed periodically. Periodically wipe the cabinet with a soft cloth and a diluted soap solution, then with a dry cloth. Q Do not use chemicals for cleaning (petrol, paint thinner, etc. Q Do not apply oil to the inside of the unit. [. . . ]