User manual SHARP CD-BA3100H

[. . . ] If the time display is flashing, step 3 (for selecting the 12-hour or 24-hour display) will be skipped. To change the 12-hour or 24-hour display: "AM 12:00" The 12-hour display will appear. (AM 12:00 - PM 11:59) "AM 0:00" The 12-hour display will appear. (AM 0:00 - PM 11:59) "0:00" The 24-hour display will appear. [. . . ] Does the remote control sensor receive strong light? stopped in the middle of a track. tions? q Is the disc very dirty?q Has condensation formed inside the s Condensation Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc. ) or on the transmitter on the remote control. Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter with a soft cloth before operating the unit. unit? s Tuner Symptom q Radio makes unusual noise con- Possible cause q Is the unit placed near the TV or com- secutively. puter? q Is the FM/AM loop antenna placed prop- erly?Move the AC power cord away from the antenna if located near. Troubleshooting Chart s If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1. Set the unit to the stand-by mode and turn the power on again. If the unit is not restored in step 1, unplug and plug in the unit, and then turn the power on. If neither step 1 nor 2 restores the unit, do the following: Press the ON/STAND-BY button to enter the power stand-by mode. While pressing down the MEMORY/SET button and X-BASS/DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears. Remote Control s Test of the remote control Face the remote control directly to the remote sensor on the unit. The remote control can be used within the range shown below: Press the ON/STAND-BY button. Now, you can enjoy the music. Remote sensor Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD program. 8" - 20' (0. 2 m - 6 m) ­6­ 1 FM antenna Antena de FM Accessories Accesorios 3 System Connections Conexiones del sistema Remote control × 1 Controlador remoto × 1 FM/AM loop antenna × 1 Antena de cuadro de FM/AM × 1 AM loop antenna Antena de cuadro de AM 1 2 Batteries are not included. Las pilas no están incluidas. Battery Installation of the Remote Control Instalación de las pilas del controlador remoto Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). [. . . ] q " " aparecerá cuando una difusión de FM sea en estéreo. ­8­ Pulse el botón CD. Press the tray 1. 1 button to open the disc 1 5" (12 cm) 12 cm 3" (8 cm) 8 cm 2 Pulse el botón del disco 1. Place a CD on the disc tray 1, label side up. Listening to a Cassette Tape (TAPE 1 or TAPE 2) Audición de una cinta de cassette (TAPE 1 o TAPE 2) 1 2 Open the cassette door by pushing the area marked " PUSH EJECT". Abra la puerta del cassette pulsando la parte marcada " PUSH EJECT". 1 para abrir la bandeja 3 Coloque un disco compacto en la bandeja del disco 1, con el lado de la etiqueta arriba. button to close the disc 4 1 para cerrar la bandeja You can place discs on the trays 2 - 6 by following steps 2 - 4. [. . . ]