User manual SHARP CD-BK110V

[. . . ] Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Please confirm that the following accessories are included. [. . . ] The new tracks will be stored after the last track of the original programme. Even if you press the ON/STAND-BY button to enter the stand-by mode or the function is changed from CD/VIDEO CD (CD) to another, the programmed selections will not be cleared. During programme operation, random play is not possible. Repeat or random play You can play back from the desired scene by specifying the time. Whilst in the stop or playback mode, hold down the DIGEST (DIGEST/TIME SEARCH) button to enter the time search mode. - Repeat or random play / Time search selection - During playback, the current track number is displayed. Use the direct search buttons on the remote control to specify the time and track number. The tracks on the disc(s) can be played in random order automatically. If you enter an incorrect time in the time search mode or if you want to change the entered time, press the CLEAR button on the remote control. The track number can be changed only after setting the time. Press the DIGEST (DIGEST/TIME SEARCH) button again to start playback from the selected time. When the last track on the third disc has finished playing, the unit will stop automatically. If you press the NEXT button during random play, you can move to the track selected next by the random operation. Button does not allow you to move to the previous track. The beginning of the track being played will be located. In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks. Repeat or random function will not work during P. Mode before using this function on a video CD with P. Time search mode will be cancelled automatically if the desired time is not entered within 10 seconds. The time search function will not work during P. Mode before using this function on a video CD with P . [. . . ] When the recording tape reaches its end, the timer recording will end, and the unit will enter the stand-by mode. Once the time is set, the setting will be retained until a new time is entered. When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly , it may malfunction. [. . . ]