User manual SHARP CD-BK270W

[. . . ] Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Z Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. [. . . ] Z If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. Z If a disc is damaged, dirty, or loaded upside down, the disc will be skipped. Z You can locate the desired portion on a single disc only. Z When the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. You can play a disc starting with the desired track. The tracks on the disc(s) can be played in random order automatically. Selected track number You can also select a track by pressing the / button on the remote control. You can store 40 AM and FM stations in memory and recall them at the push of a button. Within 30 seconds, press the PRESET button to select the preset channel number. The stations saved in memory can be scanned automatically. Store the stations in memory, in order, starting with preset channel 1. Within 30 seconds, press the MEMORY/SET button to store that station in memory. Z The preset number will flash and the programmed stations will be tuned in sequentially, for 5 seconds each. , , To erase entire preset memory If the "MEMORY" and preset number indicators go out before the station is memorised, repeat the operation from step 2. Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in memory, the station previously memorised will be erased. Whilst pressing down the TUNER (BAND) button and the X-BASS/DEMO button, press the ON/STAND-BY button until "TUNER CL" appears. The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead disconnection. Before playback: z For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended. ) z Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. [. . . ] Move the AC power lead away from the aerial if located near. When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly , it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. [. . . ]