User manual SHARP CD-BK3020W

[. . . ] Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product. Z Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. [. . . ] Z If a disc is damaged, dirty, or loaded upside down, the disc will be skipped. Z You can locate the desired portion on a single disc only. Z When the end of the last track is reached during fast forward, "END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the unit will enter the playback mode. You can play a disc starting with the desired track. The tracks on the disc(s) can be played in random order automatically. Selected track number You can also select a track by pressing the / button on the remote control. When the end of last track of the disc selected is reached, the next disc will be automatically started. Z When the DISC SKIP button is pressed during playback, the next disc will begin automatically. z When one of the 1 - 3 buttons is pressed during playback , the selected disc will begin automatically. Z If you press the PRESET / button during random play, you can move to the track selected next by the random operation. On the other hand, the PRESET / button does not allow you to move to the previous track. , , To erase entire preset memory If the "MEMORY" and preset number indicators go out before the station is memorised, repeat the operation from step 2. Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in memory, the station previously memorised will be erased. Whilst pressing down the TUNER (BAND) button and the X-BASS/DEMO button, press the ON/STAND-BY button until "TUNER CL" appears. The backup function protects the memorised stations for a few hours should there be a power failure or the AC power lead disconnection. Before playback: z For playback, use normal or low-noise tapes for the best sound. (Metal or CrO tapes are not recommended. ) z Do not use C-120 tapes or poor-quality tapes, as they may cause malfunctions. Z Before loading a tape into the cassette compartment, tighten the slack with a pen or a pencil. Press the ON/STAND-BY button to turn the power on. [. . . ] z Is the FM aerial or AM loop aerial placed properly?Move the AC power lead away from the aerial if located near. When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly , it may malfunction. [. . . ]