User manual SHARP CD-C3H

[. . . ] It will guide you in operating your SHARP product. Contents Important Instruction , , Important Instruction - Introduction / Contents Page , , CD Playback , , Playback of MP3 Encoded CD Page Accessories . 27, 28 , , General Information Precautions . 29 , , Preparation for Use System Connections . 11 , , Radio Listening to the Radio . [. . . ] Place the video CD(s) on the disc tray, label side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the video CD in the open position. z Video CDs can be placed in any open position in the disc tray. z Be sure to place 8 cm (3") Video CD(s) in the middle of the disc positions. 6 Press the OPEN/CLOSE button to close the disc tray. Video CD Playback Total number of tracks on the video CD whose number is flashing Total playing time of the video CD whose number is flashing 7 8 To select the video CD you want to listen to first, press the DISC SKIP button. Press the ( /SELECT/RESUME) button to start playback. z Playback will begin from track 1 on the disc you have selected to play. After that disc finishes playing, the next disc will automatically start playback. z When the last track on the third disc has finished playing, the unit will stop automatically. z When there is no video CD in one of the disc 1 - 3 positions, the next video CD will be played. 1 2 3 Notes: Turn on the TV and set the input selector to "VCR". Press the ON/STAND-BY button to turn the power on. Press the CD/VIDEO CD (CD) button. z During playback, you can select another disc by pressing either of the DISC SKIP button or one of the 1 - 3 buttons. z Whilst the disc is being read ("TOC READ" is displayed), another disc cannot be selected even if you press the DISC SKIP button or one of the 1 - 3 buttons. E-19 ENGLISH Sound Control (See page 13. ) 01/6/12 CD-C3H(X)E2. fm CD-C3H To interrupt playback: Press the button on the remote control. To resume playback from the same point, press the /SELECT/RESUME button. , , Scan play For fast forward: Press and hold down the PRESET button during playback. To stop playback: Press the ( /RETURN) button. Whilst in the stop mode, press the OPEN/CLOSE button. [It is not necessary to press the ( /SELECT/RESUME) button. ] z A track number higher than the number of tracks on the disc cannot be selected. z During random play, direct search system is not possible. Caution: z After performing repeat or random play, be sure to press the ton. Otherwise, the disc(s) will play continuously. play, repeat or random play is not possible. ( /RETURN) but- E-21 ENGLISH 01/6/12 CD-C3H(X)E3. fm Programmed Play You can choose up to 32 selections for playback in the order you like. CD-C3H 3 You can also select a track by pressing the PRESET (NEXT ) button. Selected track number PRESET ( PREV. ) or 4 Press the MEMORY/SET (MEMORY) button to save the track number. Playback order When the track is memorised, "MEMORY" will appear. Advanced Video CD (Version 1. 1) Playback Press the direct search buttons on the remote control to select the desired track. 5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed. If you make a mistake, the programmed tracks can be cleared by pressing the CLEAR button. 6 Press the ( /SELECT/RESUME) button to start playback. To clear the programmed selections: Press the CLEAR button on the remote control whilst the "MEMORY" indicator is lit. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. When all the tracks are cleared, "MEMORY" will disappear. 1 2 Press the DISC SKIP button 3 times for the unit to read the information of each disc to programme them. Whilst in the stop mode, press one of the 1 - 3 buttons to select the desired disc. Selected disc number Adding tracks to the programme: If a programme has been previously stored, the "MEMORY" indicator will be displayed. The new tracks will be stored after the last track of the original programme. Notes: z Opening the disc tray automatically cancels the programmed sequence. z Even if you press the ON/STAND-BY button to enter the stand-by mode or the function is changed from CD/VIDEO CD (CD) to another, the programmed selections will not be cleared. [. . . ] z Are the capstans, pinch rollers, or heads dirty?z If a power failure occurs during playback, the heads remain engaged with the tape. Wait until electricity resumes. , , Video CD Symptom Possible cause z The picture is not displayed during z Is the TV unplugged?z Is the input selector on the TV set to other than "VCR"? [. . . ]