User manual SHARP CD-C407H

[. . . ] 26 , , Preparation for Use System connections . 9 , , Tape Playback Listening to a cassette tape (TAPE 1 or TAPE 2) . 27 , , Basic Operation General control . 12, 13 Playback of a video CD (CDs) with P. [. . . ] Select the menu number you want to play. , , To move the menu screen (menu screen with more than 1 page) To move to the next menu screen: Whilst in the stop mode, press the / button. - Playback of a video CD (CDs) with P. (Version 2. 0) - To interrupt playback: Press the button on the remote control. To resume playback from the same point, press the /SELECT/RESUME button. To return to the previous menu screen: Whilst in the stop mode, press the / button. To stop the current operation and return to the menu: Press the ( /RETURN) button for less than 0. 5 seconds. Video CD Playback To completely stop the video CD: Hold down the ( /RETURN) button for more than 1 second. Notes: To remove the video CDs: Whilst in the stop mode, press the OPEN/CLOSE button. Then, press the DISC SKIP button to rotate the disc tray and remove the remaining disc. z This function may not work, depending on the disc. or NEXT button on the remote control allows you to locate the desired portion. After use: Press the ON/STAND-BY button to enter the power stand-by mode. , , To play without activating the playback control function You can play a video CD with P. B. C. without activating the playback control function. In this case, the menu screen will not appear, and the disc will be played in the same way as a video CD without P . B. C. Notes: z Playback control allows a video CD to be played back according to instructions recorded on the disc. The "previous", "next", "return" and "select" operations may function differently, depending on the PBC CDs. z Some video CDs with playback control may have an "auto pause" recorded on them. When such a disc is played, the screen will stop automatically at the point where an "auto pause signal" has been inserted. z If the picture looks dirty when a video CD is played back, there may be a scratch on the video CD. z You can skip to any track by pressing the / button repeatedly until the desired track number appears. [Example] When the current track is 9 2 Use the direct search buttons on the remote control to select the desired track. Selected track number z The direct search buttons allow you to select up to number 10. z When selecting number 11 or more, use the "+10" button. Video CD Playback A. For example, to choose 13 Beginning of track 9 Beginning of track 10 1 Press the "+10" button once. 2 Press the "3" button. Notes: z You can skip to the beginning of a track on a single disc only. or NEXT button on the remote control allows you to locate the beginning of a track. B. For example, to choose 30 1 Press the "+10" button three times. 2 Press the "0" button. , , Scan play For fast forward: Press and hold down the / / button during playback. button during playback. 3 Press the / ( /SELECT/RESUME) button to start playback. Playback of the selected track is started. When the end of last track of the disc selected is reached, the next disc will be automatically started. For fast reverse: Press and hold down the To stop playback: Press the ( /RETURN) button. Notes: z Normal playback will resume when the / or / button is released. z You can locate the desired portion on a single disc only. [. . . ] 2 For timer playback: For timer recording: Load a cassette or discs to be played. Load a cassette for recording in the TAPE 2 cassette compartment. Advanced Features - Timer and sleep operation - 1 2 Press the ON/STAND-BY button to turn the power on. Press the CD/VIDEO CD, TUNER (BAND) or TAPE (1 select the desired function. 2) button to To select the timer playback source: CD/VIDEO CD, TUNER (BAND) or TAPE (1 2). [. . . ]