User manual SHARP CD-CH1500H

[. . . ] Audio Tower System CD-CH1500H besteht aus CD-CH1500H (Hauptgerät) und CP-RW5500H (Lautsprechersystem). Système hi-fi CD-CH1500H composé de CD-CH1500H (appareil principal) et de CP-RW5500H (enceintes acoustiques). AUDIO TOWER SYSTEM SYSTÈME HI-FI AUDIO TOWER SYSTEM AUDIO TOWER SYSTEM SISTEMA AUDIO A TORRE AUDIO TOWER SYSTEM AUDIO TOWER SYSTEM Audio tower system CD-CH1500H que consta de CD-CH1500H (aparato principal) y CP-RW5500H (sistema de altavoces). CD-CH1500H Audio Tower System bestående av CD-CH1500H (huvudenhet) och CP-RW5500H (högtalarsystem). Sistema audio a torre CD-CH1500H consiste di CD-CH1500H (apparecchio principale) e CP-RW5500H (diffusori). [. . . ] The remaining playing time for the current track will be displayed. Normal playback mode 2 Press the or one of the DISC 1 - DISC 6 buttons to start playback. z If playback is started by pressing the button, repeat or random play will be performed on all discs. z If playback is started by pressing one of the DISC 1 - DISC 6 buttons, repeat or random play will be performed on that disc. To repeat a programmed sequence: Perform steps 1 - 6 in the "Programmed Play" section, select the repeat playback and then press the button. Notes: z After performing repeat or random play, be sure to press the button. Otherwise, the disc(s) will play continuously. z In random play, the CD player will select and play tracks automatically. (You cannot select the order of the tracks. ) To cancel repeat or random play: Press the PLAY MODE button repeatedly to select the normal play mode. The total remaining playing time for the disc will be displayed. Notes: z During random play, the total remaining playing time will not be displayed. z Depending on the CD, the playing time display may not match the total playing time which is indicated on the CD jacket, as the time between tracks is not included. E-16 ENGLISH 01/1/9 E2. fm Programmed Play By specifying discs from 1 to 6, and tracks from 1 to 99, you can choose up to 32 selections for playback in the order you like. 1 6 7 Press the Press the button. button to start playback. When in the stop mode, press the MEMORY button. z At this time, playback will not begin even if one of the DISC 1 - DISC 6 buttons is pressed. 2 Press one of the DISC 1 - DISC 6 buttons to select the desired disc. Selected disc number To cancel the programmed play mode: Whilst in the stop mode, press the CLEAR button. The MEMORY indicator will disappear and all the programmed content will be cleared. Advanced CD Playback To clear the programmed selections: Press the CLEAR button whilst the "MEMORY" indicator is flashing. Each time the button is pressed, one track will be cleared, beginning with the last track programmed. 3 Turn the jog dial to select the desired track. Adding tracks to the programme: If a programme has been previously stored, the "MEMORY" indicator will be displayed. The new tracks will be stored after the last track of the original programme. To check which tracks are programmed: Whilst the unit is stopped in the programmed play mode, press the or button. Selected track number Playback order 4 Press the MEMORY button to save the track number. Notes: z Opening any tray of the programmed discs automatically cancels the programmed sequence. z Even if you press the ON/STAND-BY button to enter the stand-by mode or change the function from CD to another function, the programmed selections will not be cleared. z During programme operation, random play is not possible. Playback time 5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be programmed. ENGLISH E-17 01/1/9 E2. fm -Programmed Play- Listening to the Radio 1 2 3 Press the ON/STAND-BY button to turn the power on. Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). Press the TUNING ( or or ) button to tune in to the desired station. Manual tuning: Press the TUNING ( desired station. ) button as many times as required to tune in to the Auto tuning: When the TUNING ( or ) button is pressed for more than 0. 5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. Notes: z When radio interference occurs, auto scan tuning may stop automatically at that point. z Auto scan tuning will skip weak signal stations. z To stop the auto tuning, press the TUNING ( or ) button again. z When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light. [. . . ] Condensation can cause the unit to malfunction. If this happens, leave the power on with no disc (or cassette) in the unit until normal playback is possible (about 1 hour). Wipe off any condensation on the transmitter LED with a soft cloth before operating the unit. E-36 ENGLISH 01/1/9 E4. fm Maintenance , , If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. [. . . ]