User manual SHARP CD/CP-S450/H

[. . . ] Customers without internet access may telephone 08705 274277 during office hours (or (01) 676 0648 if telephoning from Ireland). CD/CP-S450/H MINI COMPONENT SYSTEM 1 Accessories Remote control × 1 AM loop aerial × 1 FM aerial × 1 2 Battery installation of remote control Batteries are not included. Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar). 1 Remove the battery cover. 2 Insert the batteries as shown. 3 Replace the cover. Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) TINSE0373AWZZ A0102. HK ­1­ 3 System connections Right speaker Left speaker FM aerial Red Black AM loop aerial Left speaker Right speaker TV RCA lead (not supplied) Wall socket (AC 230 V, 50 Hz) To the line output sockets VCR, DVD, etc. Web-site: www. sharp. co. uk/support Help Line: 08705 274277 (office hours) ­2­ 4 Turn on your system 1 Press the X-BASS/DEMO button to cancel the demonstration mode. The first time the unit is plugged, the unit will enter the demonstration mode. You will see words scroll. 2 Press the ON/ STAND-BY button to turn the power on. Listening to a CD (CDs) 12 cm (5") 1 2 3 Press the CD button. 8 cm (3") Press the 7 OPEN/CLOSE button to open the disc tray. Place the CD(s) on the disc tray, label side up. [. . . ] When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position. Press the 7 OPEN/CLOSE button to close the disc tray. 4 5 6 To select the CD you want to listen to first, press one of s 1 - s 3 buttons on the remote control. Press the 0 / R button to start playback. Listening to the radio 1 2 Press the TUNER (BAND) button repeatedly to select the desired frequency band (FM or AM). Press the TUNING/TIME (X or W) butX ton to tune in to the desired station. When the TUNING/TIME button is pressed for more than 0. 5 seconds, scanning will start automatically and the tuner will stop at the first receivable broadcast station. If neither step 1 nor 2 restores the unit, do the following: ¡ Press the ON/STAND-BY button to enter the power stand-by mode. TM Whilst pressing down the 0 / R button and the X-BASS/ DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears. s Maintenance A Playback head B Capstan C Pinch roller D Erase head E Recording/Playback head q Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. q When cleaning the heads, pinch rollers, etc. , unplug the unit which contains high voltages. q After long use, the deck's heads and capstans may become magnetised, causing poor sound. [. . . ] q After long use, the deck's heads and capstans may become magnetised, causing poor sound. Demagenetise these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetiser. [. . . ]