User manual SHARP CD/CP-S6470/H

[. . . ] [Perform to step 3 under "If trouble occurs" Perform "Setting the Clock" from the beginning. Note that this can only be set when the unit is first installed or it has been reset. (Refer to step 3 under "If trouble occurs") ­6­ CD-BA250H/CD-BA2600H Troubleshooting Chart Many potential "problems" can be resolved by the owner without calling a service technician. If something is wrong with this product, check the following before calling your authorised SHARP dealer or service centre. Cassette deck Symptom Cannot record. Cannot record tracks with proper sound quality. [. . . ] Possible cause Is the unit placed near the TV or computer?Is the FM aerial or AM loop aerial placed properly?Move the AC power lead away from the aerial if located near. Troubleshooting Chart If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. If such a problem occurs, do the following: 1 Set the unit to the stand-by mode and turn the power on again. 2 If the unit is not restored in step 1, unplug and plug in the unit, and then turn the power on. 3 If neither step 1 nor 2 restores the unit, do the following: Press the ON/STAND-BY button to enter the power stand-by mode. Whilst pressing down the / button and the X-BASS/DEMO button, press the ON/STAND-BY button until "CLEAR AL" appears. Remote Control Test of the remote control Face the remote control directly to the remote sensor on the unit. The remote control can be used within the range shown below: Press the ON/STAND-BY button. Now, you can enjoy the music. Remote sensor Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme. 0. 2 m - 6 m (8" - 20') Before transporting the unit 1 2 3 4 5 Press the ON/STAND-BY button to turn the power on. Press the OPEN/CLOSE button to open the disc tray. Press the OPEN/CLOSE button to close the disc tray. Make sure that "NO DISC" is displayed. Read the demagnetiser's instructions carefully before use. q Clean the dust or stain on the CD pickup lens using a commercial cleaning disc (brush type). TAPE 1 TAPE 2 D E B C FM stereo mode indicator To receive an FM stereo transmission: Press the TUNER (BAND) button to display the "ST" indicator. q " " will appear when an FM broadcast is in stereo. CD-BA250H/CD-BA2600H FM stereo receiving indicator CD-BA250H/CD-BA2600H Using the Radio Data System (RDS) RDS is a broadcasting service which a growing number of FM stations provide. These FM stations send additional signals along with their regular programme signals. They send their station names, and information about the type of programme such as sports or music, etc. When tuned to an RDS station, "RDS" and the station name will be displayed. "TP" (Traffic Programme) will appear on the display when the received broadcast carries traffic information, and "TA" (Traffic Announcement) will appear whilst a traffic information is on air. "EON" will appear whilst the EON (Enhanced Other Networks information) data is broadcast. "PTYI" (Dynamic PTY Indicator) will appear whilst the Dynamic PTY station is received. "RT" (Radio Text) will appear whilst the unit receives the Radio text data. "CT" (Clock Time) will appear whilst the unit receives the RDS CT data. [. . . ] Weather reports and forecasts and meteorological information. Stock Market reports, commerce, trading, etc. For programmes targeted at a young audience, primarily for entertainment and interest, rather than where the objective is to educate. Programmes about people and things that influence them individually or in groups. Includes: sociology, history, geography, psychology and society. [. . . ]