User manual SHARP CD-DV777W

[. . . ] DVD MINI SYSTEM MINI-CHAÎNE DVD CADENA MINI CON DVD MODEL MODÈLE MODELO CD-DV777W OPERATION MANUAL MODE D'EMPLOI MANUAL DE MANEJO ENGLISH FRANÇAIS ESPAÑOL Please refer to pages i and E-1 to E-70. Se reporter aux pages i et F-1 à F-70. Consulte las páginas ii y S-1 a S-70. NTSC/PAL SHARP CORPORATION *DV777W(EN)_FRONT 1 12/4/04, 16:17 CD-DV999W (Z) TINSZA017AWZZ CD-DV777W Copyright Information: I Unauthorized copying, broadcast, public display, transmission, public performance and rental (regardless of whether or not such activities are for profit) of disc contents are prohibited by law. I This system is equipped with copy protection technology that causes substantial degradation of images when the contents of a disc are copied to a video tape. Renseignements sur les droits d'auteur: I La copie, la diffusion, l'affichage public, la transmission, la représentation publique ou la location non autorisés (que ces activités soient à but lucratif ou non) du contenu d'un disque sont interdits par la loi. [. . . ] This returns to the screen that was shown before the setup screen was displayed. Direct title skip Direct chapter skip Direct time skip Subtitle Angle Audio 3-D Virtual Surround Digital gamma Digital super picture 6 1 2 3 4 5 6 7 G S 5 I 2/5 8 / 30 01 : 30 : 08 2 E NG L I S H 1 D 1 5. 1 c h ON 0 BIT RATE ON ON ENTER 7 DVD I 6 I I 7 8 0 10 Mbps 9 I I 8 G 8 9 SELECT ENTER RETURN I 10 I BITRATE indicates the amount of data that is being transferred to the unit per second. However, note that picture quality is not always in proportion to the bit rate. 9 S Advanced DVD Features 5 Note: I I 4 SHARP TINSZA017AWZZ (Z) *DV777W_EP32-35 32 Note: In function control mode, you can return to the previous setting screen by pressing the RETURN button or the SET UP button whilst pressing down the SHIFT button. E-32 12/4/04, 13:49 CD-DV777W (Z) TINSZA083AWZZ CD-DV777W ENGLISH Using the function control (continued) 2 Use the 0 - 9 buttons to select the title number to which you want to skip. 5/ 5 DVD I You can also select the title number by pressing the cursor L or M button. 3 Press the ENTER button. The beginning of the specified title appears. Notes: Advanced DVD Features I The title number you can enter depends on number of the titles recorded on a disc you play. I The direct title skip function is not possible with discs on which no titles are recorded. H Direct chapter skip Example: Selecting chapter 10 1 2 Press the DIRECT button twice to select Use the 0 - 9 buttons to select the chapter number to which you want to skip. I You can also select the chapter number by pressing the cursor L or M button. ­­ / 30 . DVD 10 / 30 DVD 3 H Direct title skip Example: Selecting title 5 Note: Press the ENTER button. The beginning of the specified chapter appears. 1 E-33 *DV777W_EP32-35 Press the DIRECT button to select . ­/5 DVD The chapter number you can enter depends on number of the chapters recorded on the disc. 33 12/4/04, 13:49 CD-DV777W (Z) TINSZA083AWZZ Using the function control (continued) H Direct time skip Notes: 2/5 10 / 30 ­ ­ : ­ ­ :: ­ ­ CD-DV777W ENGLISH 1 2 Press the DIRECT button three times to select . Use the 0 - 9 buttons to enter the time to which you want to skip. DVD DVD 01 : 06 ­­ 3 Press the ENTER button. The image jumps to the point you specified. You can change the angle of view when playing a DVD-Video disc that contains scenes recorded from multiple angles. Notes: I The time you can enter depends on the time recorded on a disc. I The direct time skip function is not possible with discs on which no times are recorded. 1 2 Press the SET UP button whilst pressing down the SHIFT button during playback. The function control screen appears. H Subtitle language setting Example: Selecting "3 SPANISH" Use the cursor L or M button to select and then press the ENTER button. Press the cursor L or M button to select the angle number you want. The number of recorded angles differs depending on the disc used. DVD H 1 1 2 3 Press the SET UP button whilst pressing down the SHIFT button during playback. The function control screen appears. 3 DVD Use the cursor L or M button to select and then press the ENTER button. Press the cursor L or M button to select the subtitle language you want to use. DVD 2 ENGLISH Advanced DVD Features I You can also enter the time by pressing the cursor L or M button. Then press the cursor 1 or 0 button to select the place where you want to enter the time. I You can also press the SUB TITLE button on the remote control for the same operation in step 3. (You do not need to do the steps 1 and 2. ) I This function can only be used for discs on which subtitles have been recorded with multiple subtitles. I Some DVD discs are marked "Forced Display". With such discs, the subtitles OFF". This does not indicate a fault will be displayed even if you select " with your unit. I If no subtitles are recorded on the disc, " xx" is displayed. H Angle setting 4 DVD Press the ENTER button to confirm the setting. You can exit the function control screen by pressing the SET UP button whilst pressing down the SHIFT button or the RETURN button. 4 3 S P AN I S H Notes: I You can also press the ANGLE button on the remote control for the same operation in step 3. (You do not need to do the steps 1 and 2. ) I This function can only be used for discs with multiple angles recorded. You can also toggle the setting between "OFF" and the selected language by pressing the cursor 1 or 0 button. 4 Press the ENTER button to confirm the setting. You can exit the function control screen by pressing the SET UP button whilst pressing down the SHIFT button or the RETURN button. E-34 *DV777W_EP32-35 34 12/4/04, 13:49 CD-DV777W (Z) TINSZA083AWZZ CD-DV777W ENGLISH Using the function control (continued) H Audio setting A number of different methods are used to record audio onto a DVD-Video disc, including multi-channels (used for voiceovers in other languages), DTS, MPEG audio and Linear PCM. Your system provides a number of different audio modes from which you can choose to suit the type of disc you are playing. H 3-D Virtual Surround setting I You can enjoy 3-D surround on DVD with Dolby Digital Sound. I You can also enjoy 3-D surround using 3 speakers. 1 Press the SET UP button whilst pressing down the SHIFT button during playback. The function control screen appears. 1 2 Press the SET UP button whilst pressing down the SHIFT button during playback. The function control screen appears. Advanced DVD Features 2 Use the cursor L or M button to select and then press the ENTER button. Press the cursor L or M button to select the audio format you want to use. DVD H 2 1 D Use the cursor L or M button to select and then press the ENTER button. ON P CM N 5. 1 c h 2L 0 G S 0 10 BIT RATE Mbps ON ENTER SELECT ENTER RETURN 5. 1 c h 0 0 10 3 2/5 10 / 30 01 : 06 : ­­ I SH 2 2 L P CM N 5. 1 c h 0 0 3 4 5 Press the cursor L or M button to select "ON" or "OFF". Whilst "ON" is selected, use the cursor 1 or 0 button to change the level setting. ON P CM N 5. 1 c h 2L 0 G S 0 10 DVD BIT RATE Mbps ON ENTER SELECT ENTER RETURN 10 Press the ENTER button to confirm the setting. You can exit the function control screen by pressing the SET UP button whilst pressing down the SHIFT button or the RETURN button. 4 Press the ENTER button to confirm the setting. You can exit the function control screen by pressing the SET UP button whilst pressing down the SHIFT button or the RETURN button. Notes: I 3-D Virtual Surround will not function when Compression is set to ON. (See page 25. ) I 3-D Virtual Surround will function when headphones are in use. I The equaliser mode will change to FLAT mode when 3-D Virtual Surround is ON. [. . . ] G If a power failure occurs during playback, the heads remain engaged with the tape. Do not open the compartment with great force. G The system does not operate even if the power is on. (Sound is not heard. ) E-67 *DV777W_EP67-70 67 12/4/04, 13:54 CD-DV777W (Z) TINSZA083AWZZ CD-DV777W H Tuner Symptom G The radio makes unusual noises continuously. H Clearing all the memory (reset) Possible cause G Is the unit placed near the TV or computer?G Is the FM aerial or AM loop aerial placed properly? [. . . ]