User manual SHARP CD-MPX200H

[. . . ] Only the above accessories are included. Z Use of controls, adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. When the ON/STAND-BY button is set at STAND-BY position, the unit may be brought into operation by the timer mode or remote control. [. . . ] Whilst in the playback mode, hold down the DIGEST (DIGEST/TIME SEARCH) button to enter the time search mode. Z The track being played back will be divided into 9 sections and playback will be paused. Z Each time a divided section is displayed, you can hear the first several seconds of the section. Use the direct search buttons on the remote control to specify the time. Press the direct search buttons on the remote control to select the scene you want to watch. z Playback will be started from the selected scene. Z When the last track on the third disc has finished playing, the unit will stop automatically. Selected time z The point of specified time will be located on the track being played and playback will resume from that point. Z When the last track on the third disc has finished playing, the unit will stop automatically. Z The track digest function works only during playback. Z This operation is not accepted by a short time track (less than one minute), still pictures (menu display, photo, etc. Z This function is invalid with still pictures (menu display, photo, etc. Z Every marked scene will be erased automatically when the programme is memorised. Z If more than 9 bookmarks are created, bookmarks will be erased in the order they were created. This function is to restart playback from the point where it has stopped. Z Resume play cannot be activated when the function is changed from CD/VIDEO CD (CD) to another or the unit is set to the power stand-by mode. Z Resume play cannot be performed whilst opening the disc tray or after changing the disc. Usually this unit detects the video CD and plays back pictures and sounds. In case this unit fails to judge it correctly, you can play back the video CD manually. Each time the OSD (OSD ON/OFF) button is pressed during playback or in the stop mode, the display will change as follows: Z Whilst in the "VCD ON" state, you cannot play back audio CDs. During the stop mode, hold down the ton for more than 1 second. You can check the operation of the main unit by the on-screen display. [. . . ] Symptom Possible cause z The picture is not displayed during z Is the TV unplugged?Z Is the unit being played without selecting video CD?Z The picture quality is poor, or it is z Is the disc very dirty?Z Playback stops in the middle or is z Does the disc satisfy the standards? [. . . ]