User manual SHARP CD-MPX870/W

[. . . ] The illustrations printed in this operation manual are for the model CD-MPX870. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] This unit recognizes and displays up to 48 characters for folder names, and up to 32 characters for title 1/2/3. You can search and play files by folder or title 1/2/3 within one MP3/ WMA disc. Use the or cursor button to scroll and select a folder (or title), and then press the ENTER button. / button, and the unit starts to read the MP3 "NAVI READ" appears and the display shows the total number of folders and files on the selected disc. MP3 indicator WMA indicator Total number Total number of folders of files The unit plays from the selected file to the last file in the selected folder (or title), and the previous display returns. File search by title 1/2/3: In step 5, select "T-1", "T-2" or "T-3" and follow the same steps as file search by folder. Notes: In the MP3/WMA navigation mode, direct play and direct search functions are disabled. If a folder, title or file name does not appear, or appears incorrectly, remove and reinsert the disc and try again. The following steps describe file search by folder: The total number of folders (or titles) appears for 2 seconds, and names of the first 2 folders (or titles) are displayed. The NAVIGATION button allows you to go one step back. If you press the / button instead of the ENTER button, all files in the selected folder (or title) are played. By entering a name, you can search files by folder or title 1/2/3 within one MP3/WMA disc. The unit searches for the same name within folders (or titles). If the search word is not in the folder (or title) name, "NOT FOUND" appears and the menu returns. Notes: The unit searches regardless of the case, and names found will appear in uppercase. Character entry with direct buttons: The direct buttons on the remote control can also be used for character entry. In step 5 on the left, use buttons 0 9 to enter alphabets. alphabet types change as you press a button. For example, press "2" four times to enter "C". Cursor button to select the desired button to go to the next page of character To delete an entered character, move the cursor to the character with the or button and press the CLEAR/DIMMER button on the remote control. Repeat steps 5 and 6 to enter characters. In the folder (or title) name search, you do not have to enter the full name. [. . . ] Press the ON/STAND-BY button to enter the power stand-by mode. While pressing down the button and the button, press the TUNER (BAND) button until "CLEAR ALL" appears. Dirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol. [. . . ]