User manual SHARP CD-PC671H

[. . . ] REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Instruction Explanation of Graphical Symbols: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] When there is no disc in one of the disc trays (1 - 5), the empty tray will be skipped to the next tray with a disc. 3" (8 cm) TIMER To remove the discs: In the stop mode, press the 1 - 5 buttons and within 5 seconds, press the OPEN/CLOSE button. 5 4 3 2 1 CD 5 Press OPEN/CLOSE button to close the disc tray 1. MP3 indicator WMA indicator [MP3/WMA] [CD] Total number of Total playing time tracks on the disc of the disc Total number Total number of files of folders Due to the structure of the disc information, it takes longer to read an MP3/WMA disc than a normal CD (approximately 20 to 90 seconds). Caution: Do not place two discs in a same tray. Do not play discs of special shapes (heart, octagon, etc. ) as it may cause malfunctions. Do not push the disc tray while it is moving. If the power fails while the tray is open, wait until the power is restored. If the disc tray is stopped with force, "ER-CD21" will appear on the display for 3 seconds and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. If a disc is damaged, dirty, or loaded upside down, the disc will skip or not play. 6 7 You can place discs on the trays 2 - 5 by following steps 3 - 5. Press the / button to start playback. Disc play indicator 21 CD or MP3/WMA disc Playback To exchange other discs while playing a disc: Press one of the 1 - 5 buttons for the stopped disc and within 5 seconds, press the OPEN/CLOSE button and exchange discs. CD-PC671H Listening to a CD or MP3/WMA disc (continued) Various disc functions Function Play Main unit Remote control Operation Press in the stop mode. Notes for CD: Track up/track down is possible only within individual discs. If the direct search buttons are pressed while the disc is stopped, press the / button to start the desired track on the current disc. Notes: A track number higher than the number of tracks on the disc cannot be selected. During random play, direct search is not possible. 23 CD or MP3/WMA disc Playback CD-PC671H Advanced CD or MP3/WMA disc playback (continued) Repeat play Repeat play can play all 5 discs, all tracks on a chosen disc, or a programmed sequence continuously. To repeat one disc: Press the PLAY MODE button once. Press the / button. Random play The tracks on the disc(s) can be played in random order automatically. To random play all tracks on up to 5 discs: Press the PLAY MODE button for 2 seconds on the remote control. CD or MP3/WMA disc Playback To repeat all tracks on up to 5 discs: Press the PLAY MODE button twice. To repeat desired tracks: Perform steps 1 - 6 in "Programmed play" section on page 25 and then press the PLAY MODE button. To cancel random play: Press the PLAY MODE button. "R" will disappear Notes: If you press the button during random play, you can move to the next track by the random operation. On the other hand, the button does not allow you to move to the previous track. The beginning of the track being played will be located. [. . . ] Caution: Do not use chemicals for cleaning (gasoline, paint thinner, etc. ). Do not apply oil to the inside of the unit. It may cause malfunctions. 42 Specifications As part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. [. . . ]