User manual SHARP CD-RW5000H

[. . . ] CD-RW5000H audio tower system bestaande uit CD-RW5000H (hoofdtoestel) en CP-RW5500H (luidsprekersysteem). CD-RW5000H Audio Tower System consisting of CD-RW5000H (main unit) and CP-RW5500H (speaker system). MODELL MODÈLE MODELO MODELL MODELLO MODEL MODEL CD-RW5000H BEDIENUNGSANLEITUNG MODE D'EMPLOI MANUAL DE MANEJO BRUKSANVISNING MANUALE DI ISTRUZIONI GEBRUIKSAANWIJZING OPERATION MANUAL DEUTSCH FRANÇAIS ESPAÑOL SVENSKA ITALIANO NEDERLANDS ENGLISH Siehe Seiten i bis v und D-1 bis D-38. Se reporter aux pages i à v et F-1 à F-38. Consulte las páginas i al v y S-1 al S-38. [. . . ] z Do not push the disc tray whilst it is moving. z If the power fails whilst the tray is open, wait until the power is restored. z If the disc tray is stopped forcibly, "E-CD20" will appear in the display and the unit will not function. If this occurs, press the ON/STAND-BY button to enter the power stand-by mode and then turn the power on again. z If TV or radio interference occurs during CD operation, move the unit away from the TV or radio. z If a disc is damaged, dirty, or loaded upside down, the disc will be skipped. z You can skip to any track by turning the jog dial until the desired track number appears. Notes: z You can locate the beginning of a track on a single disc only. z The or button on the remote control allows you to locate the beginning of a track. , , To locate the desired portion For audible fast forward: Press and hold down the button during playback. For audible fast reverse: Press and hold down the button during playback. Notes: z Normal playback will resume when the or button is released. z When the end of the last track is reached during fast forward, "DISC END" will appear on the display and CD operation will be paused. When the beginning of the first track is reached during fast reverse, the disc will start playback automatically. z You can locate the desired portion on a single disc only. ENGLISH E-15 01/1/9 E2. fm -Listening to a CD (CDs)- CD Playback To Specify a Disc to Play You can play a disc by specifying the disc number. Repeat or Random Play You can select one of the CD playback modes; "Repeat play", "Random play" and "Normal play". -To Specify a Disc to Play / Switching the Time Display / Repeat or Random Play- Press one of the DISC 1 - DISC 6 buttons to play the desired disc. 1 Press the PLAY MODE button repeatedly to select the playback mode. Selected disc number Advanced CD Playback z Only the chosen disc will be played and stopped automatically. Notes: z When radio interference occurs, auto scan tuning may stop automatically at that point. z Auto scan tuning will skip weak signal stations. z To stop the auto tuning, press the TUNING ( or ) button again. z When an RDS (Radio Data System) station is tuned in, the frequency will be displayed first, and then the RDS indicator will light. z Full auto tuning can be achieved for RDS stations "ASPM", see page 22. To receive an FM stereo transmission: Press the ST-MODE button on the remote control to display the "ST" indicator. z " " will appear when an FM broadcast is in stereo. FM Stereo Mode Indicator -Listening to the Radio- Radio FM stereo receiving indicator z If the FM reception is weak, press the ST-MODE button. The reception changes to monaural, and the sound becomes clearer. After use: Press the ON/STAND-BY button to enter the power stand-by mode. E-18 ENGLISH Sound Control (See page 12. ) 01/1/9 E2. fm Listening to the Memorised Station , , Memorising a station You can store 40 AM and FM stations in memory and recall them at the push of a button. (Preset tuning) , , To recall a memorised station Turn the jog dial to select the desired station. 1 2 Perform steps 1 - 3 in the "Listening to the Radio" section on page 18. [. . . ] z Has condensation formed inside the unit? , , Condensation , , Tuner Symptom z Radio makes unusual noise consecutively. Possible cause z Is the unit placed near the TV or computer?z Is the FM/AM loop aerial placed properly?Move the AC power lead away from the aerial if located near. Sudden temperature changes, storage or operation in an extremely humid environment may cause condensation inside the cabinet (CD pickup, tape heads, etc. ) or on the transmitter LED on the remote control. [. . . ]