User manual SHARP CD-SW340

[. . . ] WARNUNG: SICHTBARE UND UNSICHTBARE LASERSTRAHLUNG WENN GERT GEFFNET. NICHT IN DIE STRAHLUNG SCHAUEN ODER DIREKT MIT OPTISCHEN HILFSMITTELN BETRACHTEN. ATTENTION: RAYONS LASER VISIBLE ET INVISIBLE EN CAS D'OUVERTURE. NE PAS REGARDER LE FAISCEAU DIRECTEMENT OU AVEC DES INSTRUMENTS OPTIQUES. "DTS" "DTS Digital Out" """ Digital Theater Systems, Inc. `", , , , "" Dolby Laboratories. [. . . ] I 2-channel (L/R) PCM audio I Dolby Digital I 2-channel MPEG audio I 5. 1 channel MPEG audio I DTS audio (External decoder is required) CD-SW340 Types of playable discs (continued) H MP3/WMA/JPEG format on CD-R/CD-RW An MP3 file is an audio data compressed in MPEG 1 audio layer 3 format. MP3 files have the extension ". mp3". (Files with the extension ". mp3" may not play, or noise may occur during playback if not recorded in the MP3 format. ) WMA is an audio file format developed by Microsoft with the ". wma" extension. This type of audio file is recorded through Microsoft Windows operating system. A JPEG file is still image data compressed in the JPEG (Joint Photographic Experts Group) format. JPEG files have the extension "jpg". Directory and file MP3/WMA/JPEG discs consist of " folders" and "files". ENGLISH Icons used on DVD discs Sample Icons 1. Japanese Number of recorded audio tracks Type of subtitles recorded Video format Disc with Region code multiple indicator (See page 20) camera angles DVD Explanation MP3 disc WMA disc JPEG disc Directory 1 Directory 2 Title, chapter and track DVDs are divided into "titles" and "chapters". If the disc has more than one movie on it, each movie would be a separate "title". "Chapters" are subdivisions of titles. File 1 File 2 File 3 File 1 File 2 Example: DVD H Disc that cannot be played I This unit does not support below disc types: Title 1 I Title 2 I I I DVD discs that are not included in region or SECAM system DVD DVD-ROM DVD-RAM I I I I DVD-Audio CDG CD-ROM SACD Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2 Audio CDs are divided into "tracks". You can think of a "track" as one tune on an audio CD. I Above disc sometimes cannot be playback, sometimes only pictures without sound will appear or only sound can be heard. Select this setting when you have a PAL TV connected to the unit. To exit the setup screen and return to the startup screen, press the SET UP button whilst pressing down the SHIFT button or the RETURN button. Notes: I When you playback the PAL discs, either setting of "PAL" can be used on a PAL TV or a Multi-System TV. I This setting is disabled during play operation. E-23 SW250DVD_23-27_EN+ 23 27/4/05, 3:47 PM CD-SW340 The following describes how to select the DVD playback display format. ENGLISH 1 2 3 A. Viewing on a wide screen TV screen (16:9): Using a 16:9 wide image Select 16:9 for wide DVD video output. I A wide image size is displayed when playing a wide image disc. I When playing a 4:3 image disc, you can select the image size you want for the connected TV. Whilst a disc is stopped, press the SET UP button whilst pressing down the SHIFT button to display the setup screen. Use the cursor 3 or 4 button to select the "Display". Press the ENTER button and then use the cursor 3 or 4 button to select "TV TYPE". Display TV TYPE: TV MODE: TV SCAN: VOUT: OFFSET: 4:3 LB PAL INTERLACE CVBS/Y/C S3S B. Viewing on a normal size TV screen (4:3): 1. Using pan scan Select 4:3 PS . When playing a wide image disc, the left and right sides of the image are cut (pan scan) to display a natural-looking 4:3 size image. is A wide image disc without pan scan played back in letter box. [. . . ] G Cannot remove the tape. G The timer indicator is flashing. H Tuner Symptom Possible cause G Is the unit placed near the TV or computer?G Is the FM aerial or AM loop aerial placed improperly?Move the AC power lead away from the aerial if located near. G Radio makes constant unusual noise or static. E-70 SW250DVD_70-74_EN+ 70 27/4/05, 11:06 AM References CD-SW340 Troubleshooting chart (continued) H ENGLISH Remote control Symptom Possible cause G G G G G Is the AC power lead of the unit unplugged?Does the remote control sensor receive strong light? H If trouble occurs When this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal supply voltage due to lightning, etc. ) or if it is operated incorrectly, it may malfunction. [. . . ]